Blaupunkt BP-USC02 Mode D'emploi page 5

BP-USC02
6. Cleaning and Maintenance
P-USC02.indd 5
3.
Close the lid and connect the cleaner to the mains. Press the on-off switch to
switch on the cleaner. The cleaner will start the cleaning process. The cleaner will
automatically switch off after 5 minutes of cleaning. Press the on-off switch to switch
off the cleaning process prematurely.
4.
Disconnect the cleaner from the mains. Open the lid and take out the cleaned item.
Finally, empty the tank and wipe dry.
Cleaning Methods
General Cleaning
Use clear water for general cleaning. The object should be completely immersed.
However, the water should not exceed the maximum fill level.
Thorough Cleaning
In order to obtain better results, you may add a few drops of universal detergent. We
recommend using commercial dishwashing detergent – preferably without any lipid-
replenishing substances (balm).
Partial Cleaning
For partial cleaning of larger objects, use the cleaner with its lid open. Make sure not to
touch the liquid during operation!
Ultra-Cleaning
When items require extensive cleaning, use the thorough cleaning procedure first, refresh
the water and repeat until the items are cleaned to satisfaction.
General
Before starting any cleaning or maintenance activities:
1.
Unplug the appliance's power cord from the outlet.
2. Let the appliance cool down.
Cleaning
Do not turn on the ultrasonic cleaner without water in the tank. Running it for more
than 15 seconds with an empty tank will damage the cleaner or severely reduce its life.
Do not run the ultrasonic cleaner continuously or for a long period of time. It is
recommended to let it cool down for 20 minutes after every 45 minutes of continuous
use.
Do not keep water in the cleaning tank after use. Empty the tank from the cleaning
solution and wipe the tank dry.
Storage
Do not expose the ultrasonic cleaner to direct sunlight for a long period of time.
Keep it in a dry, cool and ventilated place.
5
30/10/2019 12:15:18