HP Pavilion PL5000N Mode D'emploi page 53

2
Press to select submenus.
Press to set enter submenu.
SELECT
Auto and Signal meter cannot be selected while the
CableCard is inserted.
Auto program
Automatically scans all available channels.
Auto program is not available while the CableCard is
inserted.
1
Press to select ANT In.
Press to select Cable or Antenna.
SELECT
2
Press to select Mode.
Press to select All or Analog.
SELECT
All: Analog and digital
Analog: Analog only
3
Press to select Start scan.
Press to start.
SELECT
After Auto program is complete, the unit returns to
Manual program mode.
To make a channel available that has been located by
auto scan, in the Manual program mode, move the
cursor to Apply, and press Select.
Program channel
Auto
Manual
Signal meter
Auto program
ANT In
Cable
Mode
All
Start scan
Auto program
ANT In
Cable
Mode
All
Start scan
Auto program
ANT In
Cable
Mode
All
Start scan
Now scanning analog channel ...
Progress
Using the Menus
45