RugDoctor FloorDoctor HFC-1 Démarrage Rapide page 5

CLEANING DIRTY WATER TANK
Please always switch off the machine when it stands up.
If not, the machine may lose suction due to the valve being
activated accidentally.
1. Lift red release 2. Remove the
button to remove dirty water tank
dirty water tank. from the machine.
5. Rinse with fresh 6. Thoroughly dry the dirty water tank
hot tap water. and place the tank back in the unit
securely locking the tank in place.
WARNING
8 rugdoctor.com 1-800-784-3628
3. Release the lock 4. Empty and clean
buttons on the the dirty water tank.
sides of the dirty
water tank and
remove the lid.
Please clean the dirty water tank to
avoid potential odors.
CLEANING NOZZLE/BRUSH ROLL
1. Remove the nozzle and brush roll cover and rinse with warm tap water.
2. Take out the
brush roll.
Lock Hole B
Lock Hole A
4. To replace cover, press the Hook A into the Lock Hole A,
then press Hook B into Lock Hole B.
5. Press the cover into
place to close it.
3. Rinse the
brush roll with
warm tap water
and mild soap.
Dry and replace
in unit.
Hook B
rugdoctor.com 1-800-784-3628 9