AirMan 55-001 Mode D'emploi page 6

Extension hose
The extension hose makes it easy to access inflation valves that are otherwise difficult to get at – for instance between the
spokes on small tires or behind hubcaps.
Loosen the union valve and fit the threaded end of the hose into the union valve and tighten.
Screw the other end of the extension hose onto the valve of the tire to be inflated.
Press the start-switch and pump.
Connecting to 12V
Roll out the cord of the cable pack completely before use.
Place the empty cable pack in the air pump – make sure that the cord runs through the small hole at the base of the cable
pack.
Connect the cable plug to the power plug of your car.
Lifetime limited warranty
ActiveTools warrants to the original purchaser that their AirMan inflators will be free from defects in material and workmanship.
This limited warranty does not cover conditions resulting from normal wear and tear. The limited warranty does not apply in the
event of misuse or abuse of the products. ActiveTools reserves the right to substitute products or components of equal or
better quality if identical products or components are not available at the time of repair or replacement under this limited
warranty. This limited warranty is non-transferable.
General safety precautions
1. The air pump is designed for occasional use and must not operate for more than 10 minutes at a time, after which it must
be switched off and set aside for cooling for at least 10 minutes before restarting.
2. If the air pump emits abnormal sounds or overheats, turn it off immediately and let it cool off for about 30 minutes. Incorrect
use of the air pump may damage it.
3. Store the air pump in a secure location. If the air pump is not used for long periods of time, it should be stored in a dry,
locked space inaccessible to children.
4. Protect yourself against electric shock. Avoid physical contact with grounded surfaces such as pipes, radiators, electric
stoves, refrigerators, etc.
5. Never use the air pump near flammable fluids or gases. Make sure your working area is well lit.
6. Keep the air pump dry and clean to achieve maximum output and safety. Examine air pump and accessories at regular
intervals and have them repaired by an expert if they are damaged.
7. Never allow children to connect/disconnect the air pump to/from power sources. Never leave children unattended with the
air pump and never allow them to play with the accessories.
8. Never allow anyone to pump air into the mouth, ears, nose or the like of people or animals. Never use the air pump as a toy.
9. Warning! For your own safety you should only use accessories and other parts that are specified in the instructions or
recommended for use by the manufacturer. Use of accessories and other parts that are not mentioned in the instructions
may entail an increased risk for the user of the air pump.
If your AirMan includes batteries please read the following instructions and precautions carefully
Switch between battery pack and cable pack
Grip the end of the battery and pull out.
Slide the part you want to use up into the bottom of the air pump. It is in place when you hear a slight click.
Maximum pressure with 12V cable: 225 PSI / 15 Bar
Maximum pressure with 9.6V battery: 150 PSI / 10 Bar
6