TOTALINE P320 Serie Mode D'emploi page 10

Operating Manual
To adjust program schedules
Press SET 3 times, then adjust time.
SET
HOLD
RUN
Press SET, then set desired temperature.
Note: Make sure the thermostat is set to the system you want to program (Heat or Cool).
Note: To cancel an unwanted time period (except Period 1), press and hold
seconds while in the Program mode.
69-2261EFS—01
1. Press SET until Program is displayed.
s
2. Press or
Period 1 time (Mon-Fri), then press
SET.
s
3. Press or
for this time period, then press SET.
4. Set time and temperature for the next
M27913
time period (Period 2). Repeat steps 2
and 3 for each weekday time period.
5. Press SET to set weekend time
periods (Sat-Sun), then press RUN to
save & exit.
8
t
to set your weekday
t
to set the temperature
s
+ HOLD for 4
570-210