Publicité
OPERATING INSTRUCTIONS
French Fry Blade Assembly
CAUTION: Make sure that the unit is
unplugged from the power source and
the speed control dial is in the "OFF"
position before inserting or removing
attachments.
Note: The French Fry Blade is already
assembled to the blade holder. Do not
try to remove it. (Fig. 13)
1. Fit the processor bowl and spindle
as detailed previously.
2. Using the finger holes in the french fry
blade holder, fit it over the spindle and
press firmly into place as indicated.
(Fig. 14)
WARNING: USE EXTREME
CAUTION WHEN HANDLING
BLADES. BLADES ARE SHARP.
4. Fit the lid and click into place as
indicated in Setting Up section
(page 4).
5. Plug in the processor.
6. WARNING: USE THE FOOD
PUSHER TO ADD FOOD INTO THE
PROCESSOR BOWL THROUGH
THE FEEDER TUBE.
Do not overload the bowl. In one
operation, you can process a
maximum 6 cups (1500 ml) of food.
Fig. 14
Fig. 13
Processing Examples
THIN SLICING
THICK SLICING
For thin slicing:
-
Recommended speed level is High
(Cucumbers, raw potatoes, lettuce, carrots)
For coarse slicing:
-
Recommended speed level is High
(Cabbage, carrots, onions)
For fine shredding:
-
Recommended speed level is High
(Carrots, cucumbers, cabbage)
For coarse shredding: -
Recommended speed level is High
(Lettuce, carrots, apples)
Blade & Accessory Storage
When storing your appliance, place the
blades in the blade storage area on top of
the unit under the cover. The spindle and
the dough blade can be stored in the front
storage compartment. The double
chopping blade is left in the food
processor bowl. The french fry blade
must be stored carefully out of the reach
of children in a cupboard along with the
blade holder for the other blades. Use
caution when handling the blades as they
are sharp. See figure 15 for suggested
storage placement.
Fig. 15
FINE SHREDDING
COARSE SHREDDING
7
FAMILIARISESZ-VOUS AVEC VOTRE ROBOT
CULINAIRE
1. Corps de l'Appareil
2. Commande de Vitesse Marche/Arrêt
3. Boutons de Pulsions/Turbo
4. Espace de Rangement
5. Bol
6. Lame à Hacher Double
7. Poussoir
8. Presse Aliments
9. Tige
Les illustrations peuvent différer du produit réel.
Spécifications Techniques
Tension :
120V., 60Hz.
Puissance :
800 watts
Capacité :
6 tasses (1,5 litres)
Lame à Hacher
Double
10. Lame à Pâte
11. Spatule
12. Rangement des Lames
13. Râpe Mince
14. Râpe Épaisse
15. Trancheur Mince
16. Trancheur Épaisse
17. Lame à Frites
18. Porte-Lame
19. Gardes Lames (x2)
12
Publicité
