GMC GSDS800 Mode D'emploi page 5

Technical Abbreviations Key
V Volts
~ AC Alternating current
A, mA Ampere, milli-Amp
n No load speed
0
° Degrees
Ø Diameter
CE Declaration of Conformity
The undersigned: Mr Darrell Morris
as authorised by: GMC
Declares that: This declaration has been issued under the sole responsibility of the
manufacturer.The object of the declaration is in conformity with the relevant Union
harmonisation Legislation.
Identification code: 801087
Description: 800W SDS Plus Hammer Drill
Conforms to the following directives and standards:
• Machinery Directive 2006/42/EC
• Low Voltage Directive 2006/95/EC
• EMC Directive 2004/108/EC
• RoHS Directive 2011/65/EU
• EN60745-1:2009+A11:2010
• EN60745-2-6:2010
• EN55014-1:2006+A1:2009+A2:2011
• EN55014-2:1997+A1:2001+A2:2008
• EN61000-3-2:2006+A1:2009+A2:2009
• EN61000-3-3:2013
Notified body: Bureau Veritas, LCIE China
The technical documentation is kept by: GMC
Date: 16/03/15
Signed:
Darrell Morris
Managing Director
Name and address of the manufacturer:
Powerbox International Limited, handelsregister nummer 06897059. Powerbox,
Boundary Way, Lufton Trading Estate, Yeovil, Somerset, BA22 8HZ, Verenigd Koninkrijk
Hz Hertz
, DC Direct current
W, kW Watt, kilowatt
/min or min Operations per minute
-1
Decibel sound level
dB(A)
(A weighted)
Metres per second squared
m/s
2
(vibration magnitude)
Specification
Model number:
Voltage:
Power:
No load speed:
Chuck:
Impact rate:
Impact energy:
Safety clutch (operating range):
Max drilling capacity:
- Masonry
- Wood
- Steel
Power cord length:
Power cable type:
Ingress protection:
Protection class:
Dimensions (L x W x H):
Weight:
As part of our ongoing product development, specifications of GMC products may alter without notice.
Sound and vibration information:
Sound pressure L :
PA
Sound power L :
WA
Uncertainty K:
Weighted vibration:
a (Hammer drilling):
h,HD
a (Chiselling):
h,CH
Uncertainty K:
The sound intensity level for the operator may exceed 85dB(A) and sound protection measures are necessary.
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate the
duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to EN60745 or
similar international standards. The figures represent normal use for the tool in normal
working conditions. A poorly maintained, incorrectly assembled, or misused tool, may produce
increased levels of noise and vibration. www.osha.europa.eu provides information on sound
and vibration levels in the workplace that may be useful to domestic users who use tools for
long periods of time.
5
GSDS800
230-240V~, 50Hz
800W
0-900min
-1
SDS Plus
0-4800bpm
2.8J
46.5-60Nm
Ø24mm
Ø40mm
Ø13mm
2m
VDE
IP20
360 x 90 x 210mm
3.2kg
89.4dB(A)
100.4dB(A)
3dB
14.936m/s
2
14.898m/s
2
1.5m/s²
GB