Travel Lock; Operation - Carrera 571 Mode D'emploi

06. TRAVEL LOCK

It is very easy to prevent the facial cleansing brush from being switched
on unintentionally, for example when travelling.
NOTE: The travel lock is automatically deactivated when the charging
process starts.
How to activate the travel lock
1. Press and hold the on/off switch 4 for more than 3 seconds.
The on/off switch of the facial cleansing brush is locked and the
appliance switches off. The three LEDs will blink yellow 3 times.
2. In order to verify that the travel lock has been activated, press the
on/off switch 4 for less than 3 seconds. If the travel lock is enabled,
the three LEDs will blink 3 times.
3. The on/off switch is temporarily disabled; the appliance cannot be
switched on unintentionally and the batteries are prevented from
being discharged.
How to deactivate the travel lock
1. Press and hold the on/off switch 4 for more than 3 seconds; the
travel lock is deactivated and the facial cleansing brush switched on.
2. The travel lock will also be deactivated by connecting the facial
cleansing brush to the mains.

07. OPERATION

The facial cleansing brush is waterproof.
● ●
Do not immerse in water, and do not use in the shower.
● ●
The charging station and mains adapter must not come into contact
● ●
with water. They are to be kept away from the bathtub and shower.
The facial cleansing brush features 3 speed settings and 1 massage
● ●
function (speed setting 4).
The facial cleansing brush is delivered with 3 brush attachments,
● ●
1 makeup applicator and 1 massage attachment.
32 GB