Cisco Systems SPA500DS Guide Rapide page 2

Connecting the Equipment
The following procedure describes how to attach the Cisco SPA500DS to
a Cisco SPA500 Series IP Phone.
Turn both the Cisco SPA500 Series IP Phone and the Cisco
S 1
TEP
SPA500DS face down.
Align the screw hole in the CiscoSPA500 Series IP Phone with one
S 2
TEP
of the holes on the attachment arm.
Insert the pegs on the attachment arm into the peg holes as shown
S 3
TEP
below on the Cisco SPA500 Series IP Phone.
Using an attachment arm screw, secure the attachment arm to the
S 4
TEP
Cisco SPA500 Series IP Phone.
Align the right screw hole in the Cisco SPA500DS with the unused
S 5
TEP
hole on the attachment arm.
2 Cisco SPA500DS