Télécharger Imprimer la page
Campbell Hausfeld DC0801 Instructions D'utilisation Et Manuel De Pièces

Campbell Hausfeld DC0801 Instructions D'utilisation Et Manuel De Pièces

Compresseur sans huile

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

See Warranty on page 14 for important information about commercial use of this product.
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Description
This residential oilless compressor is
designed for do-it-yourselfers with a
variety of home and automotive jobs.
These compressors power spray guns,
impact wrenches and other tools.
Compressed air from this unit will
contain moisture. Install a water filter
or air dryer if application requires dry
air.
Unpacking
After unpacking the unit, inspect
carefully for any damage that may
have occurred during transit. Make sure
to tighten fittings, bolts, etc., before
putting unit into service. In case of
questions, damaged or missing parts,
please call 1-800-543-6400 for customer
assistance. Have the serial number,
model number, and parts list (with
missing parts circled) before calling.
DO NOT RETURN
THE PRODUCT TO
STOP!
THE RETAILER!
Do not operate unit
if damaged during
shipping, handling or use. Damage may
result in bursting and cause injury or
property damage.
READ & FOLLOW ALL INSTRUCTIONS
SAVE THESE INSTRUCTIONS
DO NOT DISCARD
© 2015 Campbell Hausfeld
A Marmon/Berkshire Hathaway Company
Record the Model No., Serial No. and date of purchase in the space
below.
This compressor / pump is not equipped and should not be used "as is"
to supply breathing quality air. For any application of air for human
consumption, the air compressor / pump will need to be fitted with
suitable in-line safety and alarm equipment. This additional equipment
is necessary to properly filter and purify the air to meet minimal
specifications for Grade D breathing as described in Compressed Gas
Association Commodity Specification G 7.1 - 1966, OSHA 29 CFR 1910.
134, and / or Canadian Standards Associations (CSA).
DISCLAIMER OF WARRANTIES
In the event the compressor is used for the purpose of breathing air
application and proper in-line safety and alarm equipment is not
simultaneously used, existing warranties shall be voided, and the
manufacturer disclaims any liability whatsoever for any loss, personal
injury or damage.
REMINDER: Keep your dated proof of purchase for warranty purposes!
Attach it to this manual or file it for safekeeping.
For parts, product & service information,
visit www.campbellhausfeld.com
Oilless Compressors
Model No.
____________________
Serial No.
____________________
Date of purchase
____________________
Retain these numbers for future reference.
Breathable Air Warning
DC0801
IN641500AV 12/15

Publicité

loading

Sommaire des Matières pour Campbell Hausfeld DC0801

  • Page 1 REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping. © 2015 Campbell Hausfeld For parts, product & service information, IN641500AV 12/15 A Marmon/Berkshire Hathaway Company...
  • Page 2 Operating Instructions and Parts Manual Safety Guidelines GENERAL SAFETY Since the air compressor and other This manual contains information Compressor parts may be hot components (material pump, spray that is very important to know and even if the unit is stopped. guns, filters, lubricators, hoses, etc.) understand.
  • Page 3 DC0801 General Safety Information Assembly WHEEL ASSEMBLY (Figure 2) (Continued) Wheel assembly kit includes: HANDLE ASSEMBLY (Figure 1) - 2 wheels * SPRAYING PRECAUTIONS 1. Place ends of handle around tank - 2 axle bolts * Do not and into the mounting pipe. Align...
  • Page 4 Operating Instructions and Parts Manual Introduction Check Valve - One-way valve that Tank Pressure Gauge - Will show air allows air to enter the tank, but pressure in tank while the compressor R efer to Figure 3 to locate the following prevents air in the tank from flowing is running, indicating compressor items.
  • Page 5 DC0801 Operation Installation Grounded Outlet LOCATION BEFORE FIRST START-UP BREAK-IN PROCEDURE It is extremely important to install the compressor in a clean, dry, and well (Complete this procedure before using RESET TEST ventilated area. The compressor must compressor for the first time. Once be placed on a firm, level surface where completed, it is not necessary to repeat.)
  • Page 6 Operating Instructions and Parts Manual Maintenance be actuated or it leaks air after ring is 3. If the fi lter element is dirty or released. clogged, replace it. DRAIN TANK 4. Reinstall fi lter, cover, and bolt. Disconnect, tag and lock out 1.
  • Page 7 DC0801 Maintenance (Continued) MOISTURE IN COMPRESSED AIR Moisture in compressed air will form MAINTENANCE SCHEDULE into droplets as it comes from an air compressor pump. When humidity OPERATION DAILY WEEKLY MONTHLY is high or when a compressor is in ●...
  • Page 8 Operating Instructions and Parts Manual Troubleshooting Chart Symptom Possible Cause(s) Corrective Action Compressor will not 1. Switch in OFF position 1. Make sure compressor is plugged in and switch is ON. 2. No electrical power at wall 2. Check circuit breaker or fuse at electrical panel. outlet 3.
  • Page 9 DC0801 Troubleshooting Chart (Continued) Symptom Possible Cause(s) Corrective Action Excessive moisture in 1. Excessive water in tank 1. Drain tank. discharge air 2. High humidity 2. Move to area of less humidity; use air line filter. Knocks, rattles, and/or 1. Loose mounting bolts 1.
  • Page 10 For Replacement Parts or Technical Assistance, Call 1-800-543-6400 Please provide following information: Address any correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part description and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A.
  • Page 11 DC0801 Replacement Parts List Ref. No. Description Part Number Qty. PUMP/MOTOR DC080101AV FILTER DC080150AV ● T TYPE CONNECT ● COLD START VALVE ■ O-RING ■ EXHAUST TUBE CHECK VALVE ASSEMBLY DC080152AV UNLOAD TUBE DC080162AV ▲ TANK GAUGE ▲ SAFETY VALVE ▲...
  • Page 12 For Replacement Parts or Technical Assistance, Call 1-800-543-6400 Please provide following information: Address any correspondence to: - Model number Campbell Hausfeld - Serial number (if any) Attn: Customer Service - Part description and number as shown in parts list 100 Production Drive Harrison, OH 45030 U.S.A.
  • Page 13 DC080101 Replacement Parts List Ref. Ref. Description Part Number Qty. Description Part Number Qty. ● M6X110 BOLT STATOR ● M6 SPRING WASHER BEARING ● ◆ M6 WASHER CRANKCASE ● CYLINDER HEAD CRANKCASE COVER CYLINDER HEAD GASKET M5X12 SCREW ■ VALVE PLATE BEARING ■...
  • Page 14 2. WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld a Marmon/Berkshire Hathaway Company, 100 Production Drive, Harrison, Ohio, 45030, Telephone: (800) 543-6400. 3. WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser (other than for purposes of resale) of the Campbell Hausfeld compressor.
  • Page 15 Hausfeld nie toute responsabilité pour n’importe quelle perte, blessure ou dommage. MÉMENTO: Gardez votre preuve datée d'achat à fin de la garantie! Joignez-la à ce manuel ou classez-la dans un dossier pour plus de sécurité. 15 Fr © 2015 Campbell Hausfeld IN641500AV 12/15 A Marmon/Berkshire Hathaway Company...
  • Page 16 Instructions d’utilisation et manual de pièces Directives de Sécurité GÉNÉRALITÉS SUR LA SÉCURITÉ pièces Puisque le compresseur d’air et les Ce manuel contient de l’information du compresseur peuvent être autres pièces détachées (pompe, très importante qui est fournie pour chaudes même si le modèle pistolets, filtres, graisseurs, tuyaux, la SÉCURITÉ...
  • Page 17 DC0801 Directives de Sécurité (Suite) Assemblage ASSEMBLAGE DE ROUE (Figure 2) PRÉCAUTIONS DE PULVÉRISATION ASSEMBLAGE DE LA POIGNÉE La trousse d'assemblage de la roue (Figure 1) inclut: 1. Placer les extrémités de la poignée pulvériser des matériaux - 2 roues* autour du réservoir et dans le tuyau...
  • Page 18 Instructions d’utilisation et manual de pièces Introduction Clapet - Une soupape à sens unique qui Manomètre du réservoir - Ce permet l’arrivée d’air dans le réservoir manomètre indique la pression Se référer à la Figure mais ne permet pas que l’air se recule d’air dans le réservoir pendant le Manostat - Interrupteur Auto /Off - dans la pompe.
  • Page 19 DC0801 Fonctionnement Installation Prise de Courant Mise à la Terre ENDROIT AVANT LE PREMIER DÉMARRAGE PROCÉDURE DE RODAGE Il est extrêmement important d’installer le compresseur dans un endroit propre, (Cette procédure doit être terminée sec et bien ventilé. Le compresseur doit avant d’utiliser le compresseur pour...
  • Page 20 Instructions d’utilisation et manual de pièces Entretien PURGER LE RÉSERVOIR 3. Si l'élément du fi ltre est sale ou bloqué, remplacer l'élément. 1. Éteindre le compresseur et dégager la pression du système. (Pour 4. Réinstaller le fi ltre, le couvercle et le dégager la pression du système, boulon.
  • Page 21 DC0801 Entretien (Suite) HUMIDITÉ DANS L’AIR COMPRIMÉ L’humidité dans l’air comprimé forme des gouttelettes en arrivant de la pompe du compresseur d’air. Si l’humidité est élevée, ou si le compresseur est utilisé continuellement, cette humidité s’accumulera dans le réservoir. Pendant l’utilisation d’un pistolet à...
  • Page 22 Instructions d’utilisation et manual de pièces Guide De Dépannage Symptôme Cause(s) possible(s) Mesure(s) corrective(s) Le compresseur ne 1. Interrupteur en position “OFF” 1. S’assurer que le compresseur est branché et que fonctionne pas (arrêt) l’interrupteur est à ON (marche). 2. Aucun courant à la prise de 2.
  • Page 23 DC0801 Guide De Dépannage (Suite) Symptôme Cause(s) possible(s) Mesure(s) corrective(s) Humidité excessive 1. Eau excessive dans le réservoir 1. Purger le réservoir. dans l’air de débit 2. Humidité élevée 2. Déplacer à un endroit moins humide; utiliser un filtre en canalisation d’air.
  • Page 24 Pour pièces de rechange ou assistance technique, appeler 1-800-543-6400 S’il vous plaît fournir l’information suivante: Adresser toute correspondance à : - Numéro de Modèle Campbell Hausfeld - Numéro de série (si présent) Attn: Customer Service - Description et numéro de la pièce 100 Production Drive Harrison, OH 45030 U.S.A.
  • Page 25 DC0801 Liste de pièces de rechange N° de réf. Description pièce Qté N° de POMPE/MOTEUR DC080101AV FILTRE DC080150AV ● CONNECTEUR DE TYPE T ● SOUPAPE DE DÉMARRAGE À FROID ■ JOINT TORIQUE ■ TUYAU D’ÉCHAPPEMENT ASSEMBLAGE DU CLAPET ANTI-RETOUR DC080152AV TUYAU DE DÉLESTAGE...
  • Page 26 Pour pièces de rechange ou assistance technique, appeler 1-800-543-6400 S’il vous plaît fournir l’information suivante: Adresser toute correspondance à : - Numéro de Modèle Campbell Hausfeld - Numéro de série (si présent) Attn: Customer Service - Description et numéro de la pièce 100 Production Drive Harrison, OH 45030 U.S.A.
  • Page 27 DC080101 Liste de pièces de rechange N° N° réf. pièce Qté réf. pièce Qté Description N° de Description N° de ● BOULON M6 X 110 STATOR ● RONDELLE ÉLASTIQUE M6 ROULEMENT ● ◆ RONDELLE M6 CARTER ● CULASSE DE CYLINDRE ENVELOPPE DU CARTER JOINT DE LA CULASSE VIS M5 X 12...
  • Page 28 8. RESPONSABILITÉS DE L’ACHETEUR AUX TERMES DE CETTE GARANTIE: A. Fournir une preuve d’achat datée et un état d’entretien. B. La livraison ou expédition des compresseurs portatifs ou des pièces détachées au Centre De Service Autorisé Campbell Hausfeld. Taux de frais, si applicables, sont la responsabilité de l’acheteur.
  • Page 29 Si el compresor se utiliza para producir aire respirable SIN haberle instalado el sistema de seguridad y alarma, todas la garantías se anularán y la compañia Campbell Hausfeld. no asumirá NINGUNA responsabilidad por pérdidas, heridas personales o daños. RECORDATORIO: ¡Guarde su comprobante de compra con fecha para fines de la garantía! Adjúntela a este manual o archívela en lugar seguro.
  • Page 30 Manual de Instrucciones de Operación y Lista de Partes Medidas de Seguridad GENERALES SEGURIDAD piezas Como el compresor de aire y otros Este manual contiene información del compresor podrían estar que es muy importante que sepa componentes usados (bomba de calientes, inclusive cuando la material, pistolas pulverizadoras, filtros, y comprenda.
  • Page 31 DC0801 Informaciones Generales de Ensamblaje ENSAMBLAJE DE LA RUEDA Seguridad (Continuación) (Figura 2) ENSAMBLAJE DEL MANGO El juego del ensamble de la rueda (Figura 1) PRECAUCIONES PARA ROCIAR incluye: 1. Coloque los extremos del mango Nunca - 2 ruedas* rocíe...
  • Page 32 Manual de Instrucciones de Operación y Lista de Partes Introducción Válvula de Chequeo - Esta válvula solo Manómetro del tanque - Indica la permite que el aire entre al tanque y presión de aire en el tanque mientras en Vea la Figura 3. evita que éste se regrese al cabezal.
  • Page 33 DC0801 Funcionamiento Instalación Tomacorrientes conectado a tierra ANTES DE ARRANCARLO POR PRIMERA COLOCACIÓN VEZ PROCEDIMIENTO DE ABLANDE Es extremadamente importante instalar (Complete este procedimiento antes el compresor en un área limpia, seca y de usar el compresor por primera vez.
  • Page 34 Figura 6 - Mantenimiento del Filtro este producto, comuníquese con el 3. Esta válvula de seguridad debería de Entrada de Aire concesionario de Campbell Hausfeld más cerrarse automáticamente a cercano a su domicilio. 2,76 bar - 3,45 bar. Si la válvula de seguridad no deja salir aire El filtro de entrada deberá...
  • Page 35 DC0801 Mantenimiento HUMEDAD EN EL AIRE (Continuación) COMPRIMIDO La humedad que se acumula en el aire comprimido se convierte MANTENIMIENTO en gotas a medida que sale de la bomba. Cuando el nivel de humedad SERVICIO NECESARIO DIARIAMENTE SEMANALMENTE MENSUALMENTE es muy alto o cuando el compresor ●...
  • Page 36 Manual de Instrucciones de Operación y Lista de Partes Guía de Diagnóstico de Averías Problema Posible(s) Causa(s) Acción a Tomar El compressor no 1. El interruptor está en la posición 1. Asegúrese de que el compresor esté enchufado y que el funciona OFF (apagado) interruptor esté...
  • Page 37 DC0801 Guía de Diagnóstico de Averías (Continuación) Problema Posible(s) Causa(s) Acción a Tomar Exceseso de 1. Exceso de agua en el tanque 1. Drene el tanque. humedad en el aire 2. Humedad alta 2. Mueva el compresor a una área menos húmeda; use un expulsado filtro de aire incorporado a la línea...
  • Page 38 Llamar al Distribuidor Más Cercano a Su Domicilio Sirvase darnos la siguiente información: Dirija toda la correspondencia a: - Número del modelo Campbell Hausfeld - Código impreso Attn: Customer Service - Descripción y número del repuesto según la lista 100 Production Drive de repuestos Harrison, OH 45030 U.S.A.
  • Page 39 DC0801 Lista de Partes de Reparación Descripción No. de Parte Ctd. BOMBA/MOTOR DC080101AV FILTRO DC080150AV ● CONECTOR TIPO T ● VÁLVULA DE ARRANQUE EN FRÍO ■ EMPAQUE DE ANILLO ■ TUBO DE ESCAPE ENSAMBLAJE DE VÁLVULA DE RETENCIÓN DC080152AV TUBO DE DESCARGA DC080162AV ▲...
  • Page 40 Llamar al Distribuidor Más Cercano a Su Domicilio Sirvase darnos la siguiente información: Dirija toda la correspondencia a: - Número del modelo Campbell Hausfeld - Código impreso Attn: Customer Service - Descripción y número del repuesto según la lista 100 Production Drive de repuestos Harrison, OH 45030 U.S.A.
  • Page 41 DC080101 Lista de Partes de Reparación Ref. Descripción No. de Parte Ctd. Ref. Descripción No. de Parte Ctd. ● PERNO M6X110 ESTATOR ● ARANDELA DE PRESIÓN M6 RODAMIENTO ● ◆ ARANDELA M6 CÁRTER ● CABEZAL DE CILINDRO CUBIERTA DE CÁRTER EMPAQUE DE CABEZAL DEL TORNILLO M5X12 CILINDRO...
  • Page 42 A. Suministrar prueba fechada de compra y la historia de mantenimiento del producto. B. Entregar o enviar los compresores de aire portátiles o componentes lal Centro de Servicio autorizado Campbell Hausfeld más cercano. Los gastos de flete, de haberlos, deben ser pagados por el comprador.
  • Page 43 DC0801 Operating Instructions • Instructions d’Utilisation • Manual de Instrucciones Notes / Notas...
  • Page 44 DC0801 Operating Instructions • Instructions d’Utilisation • Manual de Instrucciones Notes / Notas...