Features; Operating Instructions; How To Use "Tare" (Additive Weighing) Feature - Sunartis ME315 Mode D'emploi

2. FEATURES:

• Pull-out display extends out (about 13,5 cm) for unobstructed viewing
• Capacity: 10.000 g / 22 lb / 352 fl oz / 10 l
• Increments: 1g / 0.125 oz / 0.01 fl oz / 1 ml
• Load indicator illuminates to show how much capacity is left
• Negative illuminated display with large figures for easy reading
• Tare function for additive weighing and accurate measuring
• Low battery indicator appears on screen when power is low
• Scale automatically turns off after 3 minutes without use
• Batteries: 4x AAA 1.5 V LR03 included (separately packed in polybag)
• Dimensions: about 185 x 245 x 30 mm, weight: about 1.000 g
• 3 years SUNARTIS warranty

3. OPERATING INSTRUCTIONS:

1) Remove the protective film from the display and weighing plate
2) Insert the batteries supplied with the packaging (see section install/change
batteries)
3) Press the ON/OFF touch field to turn on the unit. The display will show the
weighing result in gram. To display the weighing result in ml, oz, fl oz, please just
press and hold UNIT touch field.
4) Place your ingredients, foods etc. on the weighing plate and just read the
weighing result on display.
5) Note: The backlight of display will turn off after about 30 seconds without use.
However, the scale is still on and functioning, just tap the glass to re-illuminate
display.
6) Press and hold the ON/OFF touch field again to turn off the unit. The selected
measuring unit will remain unchanged after switching off.
7) Clean the weighing plate after use with a damp cloth.

4. HOW TO USE "Tare" (additive weighing) feature:

1. Place first a container on the weighing plate. The scale will display the weight of
the container accordingly.
2. Press ON/OFF touch field. The display will revert to "0" (for g) or "00" (for lb. and
oz.) or 0 (for ml) or 0.00 (for fl oz).
9