Mutsy Spider Mode D'emploi page 22

English
· Blocking the swivel setting: push the
swivel blocking down. The swivel set-
ting locks automatically when the front
wheels are moved into their original,
straight position.
The brake (j)
· Press one of the brake pedals on the
rear of the frame gently with your foot
until the brake is blocked.
· Push one of the brake pedals gently
upwards with your foot to unblock the
brake.
Transporting and storing the Spider
frame
· It is easy to carry the folded Spider
frame with the handle located on
the central fastening component. A
handy transport bag is also available
that can be used to store and trans-
port Spider.
· The top of the transport bag has a slot
for the handle. The Spider and tran-
sport bag can be carried with the
(Spider) handle or with the aid of a
woven shoulder strap that is attached
to the transport bag.
The restaurant setting
· This is the lowest position in which the
pushchair can be set. For example, this
setting can be used to promote com-
pactness when the Spider stroller is
taken into restaurants.
The Spider foot muff
· To attach the foot muff, first release the
safety belt and pull the straps through
16
the gaps in the foot muff.
· You only have to release one zip fas-
tener to remove the top of the foot muff
and only use the bottom.
· You can turn the top part of the foomuff
over to give your child more comfort.
The Safe2go car seat (0-9 months)
Fitting the adapters to the frame (m)
· Fold back the side panels of the seat
(m1).
· Open the adapters with the appropri-
ate pawl and place the adapters (L+R)
around the upper frame in the indicated
positions and directions.
! Place the adapter with the R mark on
the right and the adapter with the L
mark on the left.
Fitting the Safe2go (n)
· Turn part 1 and 2 away under the seat
(diag. l) and place the car seat on the
adapters facing backwards (so that
the child is looking at the parent) by
clicking the two locking pins into the
universal locking point on the adapter
set. Check that the Safe2go car seat
is horizontal and whether the red dots
on the adapter are covered completely.
· Re-fasten the side panels to the under-
side of the seat using the velcro.
Removing the Safe2go from the Spider
stroller
· Push the two unlocking buttons of
the adapters back until the Safe2go is
released from the lock. You can now
remove the Safe2go from the Spider
stroller.