Publicité
Les langues disponibles
Les langues disponibles
EN
HOW TO USE:
• Insert the plug into the Socket (AC 220-240 V, 50-60 Hz).
• Place an induction-compatible cooking pan in the center of the cooktop plate.
• Press ON/OFF to start the heating process. The LED screen will display "ON".
• Press the "Function" key. The default Power 1300 W will be automatically selected. Press for
different levels, settings and adjustments.
• To power off the unit, press the ON/OFF button again.
• Remove the plug from the socket if the unit is not going to be used for a long period of
time.
Cooking Mode
Power
• Press the "Function" key and the display will show the default power of 1300 W.
• The power can be adjusted by touching the [+] and [-] buttons - 200 W, 500 W, 800 W, 1000
W, 1300 W, 1600 W, 1800 W and 2000 W.
• Once the cooking process has finished, press the [ON/OFF] button to switch off the induc-
tion cooktop.
• The induction cooktop will switch off automatically after 2 hours if no other function button
is pressed.
Temperature
• Press the "Function" key and the display will show the default temperature of 180 °C.
• The power can be adjusted by touching the [+] and [-] buttons - 80 °C, 100 °C, 130 °C,
160 °C, 180 °C, 200 °C, 220 °C and 240 °C
• Once the cooking process has finished, press the [ON/OFF] button to switch off the induc-
tion cooktop.
• The induction cooktop will switch off automatically after 2 hours if no other function button
is pressed.
Timer
• Start by selecting the desired cooking mode, and then press the [Timer] button. The LED
display will flash [0:00].
• Press the [+] or [-] buttons to set the timer from [0:01] minute to [4:00] hours. Press and
hold the [+] or [-] buttons for a quick time adjustment.
• Once the time is set, do not press any buttons. The LED display will flash five times. The
timer will then be active and the countdown will start.
• Once the set timing is up, the induction cooktop will switch off automatically.
• If you press any other cooking-mode button, the [Timer] button or the [ON/OFF] button,
the cooktop will exit timer mode.
Lock
• Press and hold the [LOCK] button for 3 seconds to lock the induction cooktop. The display
will show [LOC].
14
• All buttons are deactivated while in lock mode.
• To exit the Lock mode, press and hold the [LOCK] button for 3 seconds.
NOTE: If the cookware is not induction-ready the cooktop won't work and will beep. Place the
cooking pan on the center of the cooktop plate. Once it has been placed, you can switch ON
the induction cooktop.
Cookware Selection
1. Material required: Please use only induction-compatible steel, cast iron, enameled iron, or
stainless-steel cookware. Please use flat-bottom pans/pots with a diameter ranging from
12 to 24 cm.
2. Pans/Pots/Utensils should have a flat surface. Do not try to use any other kind of utensils or
vessels (especially pressure cookers).
3. While buying your cookware, look for an "Induction Compatible" sign or wording to
ensure it will work with this cooktop.
TROUBLESHOOTING
Some issues that arise may be solved by the user. If the problem persists after having tried
the following solutions, please contact Prozis customer service.
PROBLEM
CAUSE
Error code - E0
No compatible cookware
Error code - E1
Low-Voltage
Error code - E2
High-Voltage
Error code - E3
Overheating of the upper plate sensor or
short circuit
Error code - E4
Open circuit of the top plate sensor or no
connection
Error code - E5
IGBT Sensor Overheating or Short Circuit
or Fan not connected
Error code - E6
Open IGBT Sensor Circuit
The appliance does not work
The plug is not connected
---- appears in one of the
Standby mode
displays
Appliance switches off after
Normal function
2h and the display shows ----
LOC appears in one of the
LOC mode on
displays.
Warranty statement
All electrical and electronic products commercialized by Prozis via www.prozis.com are cov-
ered by the warranty applicable to the purchase and sale of consumer goods.
EN
SOLUTION
Check if the cookware is compatible
Please make sure the voltage is > 88 V, 220-240 V~
Please make sure the voltage is < 280 V, 220-
240 V~
Restart once it has cooled down. If this is not
possible, please contact Prozis.
Please contact Prozis
Please contact Prozis
Please contact Prozis
Connect the appliance to a mains power socket
This is a normal function of the equipment while it
is in standby mode. It disappears once unplugged.
The induction stove switches off automatically after
2 hours if no other function buttons are pressed.
To exit Lock mode, press and hold the [LOCK]
button for 3 seconds.
15
Publicité
