TaoTronics SoundLiberty 92 Mode D'emploi page 7

Power On (Fig. 7)
Uncover the lid and they will power on automatically.
7
L R
Power Off (Fig. 8)
Put the earbuds into the charging case and close the lid, they will turn off
automatically.
8
L R
05
Pairing
• You can use one earbud or both earbuds as per your preference. Please
refer to the corresponding pairing instructions.
• Before pairing, please turn off other Bluetooth devices and place the device
to be connected close to the earbuds.
• When the earbuds are disconnected from your device for more than 10
minutes, they will turn off automatically.
Couple Earbuds Mode
1. Uncover the lid to turn on the earbuds, they will connect with each other
automatically. The LED indicators on both earbuds will flash blue and white
alternately indicating the earbuds are in pairing mode now.
2. Turn on the Bluetooth function on your device and search for nearby
devices. Find "TAOTRONICS SoundLiberty 92" in the searching results, tap
on the name to connect.
3. Once connected, the LED indicators on both earbuds will flash blue slowly.
Note:
• The earbuds can remember the devices paired previously, and will attempt
to pair with the last connected device. If re-pairing failed, the earbuds will
enter pairing mode.
• It is not recommended to wear the two earbuds on different people. If
necessary, please keep the two earbuds close to each other in couple
earbuds mode.
06