Kaldewei SKIN TOUCH Instructions De Service page 9

Cleaning instructions:
Cleaning the SKIN TOUCH tubs:
The cleaning of the SKIN TOUCH tubs is easy and
effortless. With proper care, the SKIN TOUCH tub will
bring you joy for a very long time. Please pay special
attention to the instructions for proper care.
See also page 116
Calcium deposits can be avoided by properly closing your taps and
always emptying the SKIN TOUCH tub properly.
Only use the cleaners and disinfection materials by KALDEWEI
and follow the manufacturer's instructions.
Do not use any scrubbing, gritty (abrasive) or aggressive (e.g.
acetone, Nitro, benzine) cleaning agents. These can damage and
bleach the components.
Only use soft cleaning cloths or sponges to clean and care for
the surfaces.
Do not use scrubbing brushes or sponges, steel wools or other
abrasive materials or tools. These would damage the surfaces.
Technical changes reserved. For current status, see www.kaldewei.com
Cleaning system:
It is recommended to carry out the system-cleaning
process after every SKIN TOUCH bath.
See also page 110 / 115
If a loss in performance of the SKIN TOUCH System is detected,
it is necessary to clean the suction nozzles.
See also page 118
Cleaning of outlet and overflow units:
Rinse the surfaces with hot water and wipe off with
a soft cloth.
For dirty or blocked units, use a drain cleaner.
Always follow the manufacturer's!
Before using a drain cleaner, it is very important that plastic or
enamel covers, the intake sieves and poppets are first removed!
See also page 118 / 120
Disinfection:
The SKIN TOUCH System must be disinfected regular-
ly to prevent health risks:
- Before using for the first time.
- After each use.
- After a prolonged period of non-use.
A special KALDEWEI disinfection agent can be obtained from spe-
cialist shops.
See also page 122
272.847 / 10.2016 | © KALDEWEI | 09/128
EN