Setup; Ac Power; Ac Plug; Power Linking - Chauvet Professional PVP Serie Manuel De L'utilisateur

3. Setup

AC Power

AC Plug

Power Linking

PVP™ Series User Manual, Rev. 4
Each PVP™ has an auto-ranging power supply that works with an input voltage range of
100–240 VAC, 50/60 Hz. To determine the power requirements for each PVP™ in the
series, refer to the label affixed to the product. You can also refer to the
Specifications chart in this manual.
The listed current rating indicates the maximum current draw during normal operation.
For more information, you may download Sizing Circuit Breakers from the Chauvet
website: www.chauvetprofessional.com.
Always connect this product to a protected circuit with an appropriate electrical
ground to avoid the risk of electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Each PVP™ comes with a power linking cord to connect power between panels;
however, the power input cord is only included with the 8-pack flight case.
This cable has a powerCON® connector to connect to the PVP™ and an Edison plug for
power input. Use the table below as a reference to wire a new plug.
Connection
AC Live
AC Neutral
AC Ground
All panels in the PVP™ Series support power linking. Refer to the following table for
specifications on each panel.
@ 120 V, 60 Hz
@ 208 V, 60 Hz
@ 230 V, 50 Hz
Please refer to all applicable local codes and regulations for the proper installation
of this product.
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
PVP™ S5
9
16
18
Screw Color
Brown Yellow or Brass
Blue Silver
Green
PVP™ S7
16
27
28
Setup
Technical
7