Before the initial (mobile) use, please completely charge the internal battery fi rst. For this purpose, connect the device
to a household mains socket using the supplied adaptor. Charging takes about 5 - 8 hours for the fi rst time. The charg-
ing status will be indicated by the "CHARGE" LED on the rear: the LED turns off when the battery is fully charged.
Select BT mode by pressing MODE repeatedly. Activate BT on your smart device and pair with PSP-6AK.
Turn the MIC VOL down completely, before switching on the microphones. Exchange the microphone batteries as soon
as you notice any increased hum or noise.
1
Microphone capsule
2
Battery compartment
3
Switch pos: MIC ON
4
Switch pos: MIC OFF
Operation
Initial Use / Charging the Battery
BT
Wireless Microphones
Rotate anticlockwise to open. Insert batteries in the depicted direction in order
not to cause shortage.
Microphone on
Microphone off
18