Publicité
Les langues disponibles
Les langues disponibles
WARNING INFORMATION
• Read, study, understand and follow all instructions before operating this device.
• It is the responsibility of the owner to make sure all personnel read this manual prior to using the device. It is
also the responsibility of the device owner to keep this manual intact and in a convenient location for all to see
and read. If the manual or product labels are lost or not legible, contact Monster™ Mobile for replacements. If
the operator is not fluent in English, the product and safety instructions shall be read and discussed with the
operator in the operator's native language by the purchaser/owner or his designee, making sure that the
operator comprehends its contents.
• Do not exceed weight capacity of 225 lbs.
• Inspect before every use. Do not use if parts are loose or damaged.
• Wear gloves when lifting edges.
• Keep children away from unit.
• Do not attempt to lift the front end of the stool while sitting down on it.
• Do not stand on stool or use as a cart.
• Do not stand on footrest or use footrest as a ladder.
• Do not sit on edge of seat. Stool can tilt or tip over causing damage or personal injury.
• Use this device on level ground only.
• Do not expose to heat as some parts of this product are under pressure.
• Do not use (or modify) this stool for any other purpose than that for which it was designed.
• Do not remove any labels. Replace any damaged labels.
• This product may contain one or more chemicals known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands thoroughly after handling.
• California 93120 Compliant for Formaldehyde.
• Failure to heed these warnings may result in personal injury and/or property damage.
ASSEMBLY INSTRUCTIONS AND REPLACEMENT PARTS
1. Carefully unpack stool and components. If any parts
are missing, call Monster™ Mobile.
2. Verify proper position of all stool components, then
carefully sit down on stool to fully install seat pad
and support column.
3. Verify all components are properly assembled and
that the stool functions properly.
4. To adjust seat height, lift and hold height adjustment
lever (a) and unweight stool to raise seat.
REPLACEMENT PARTS:
• Air cylinder - part # RS100501
• Seat cushion with plate - part # RS100502
• Product Label Kit - RSMSTBS1005PLK
CARE INSTRUCTIONS
Your professional shop stool is designed to give you worry-free service with little to no maintenance. There should be no need
for periodic oiling or maintenance of the seat or cylinder. Simply clean with a damp cloth. Avoid contact with harsh chemicals.
MSTBS1005
1
2
2
(a)
11/30/15
Publicité
