Axis 216FD Guide D'installation page 7

Drop Ceiling Mount Installation Guide
10. Lift and turn the inner bracket (with camera) so that the screws on the outer bracket enter the
screw slots on the inner bracket. Make sure that the screws go all the way to the back of the
slots.
Align slots
with
screws
11. Gently tighten the screws so that the ceiling tile is held between the inner and outer brackets.
Check that none of the cabling is trapped by the brackets.
12. Referring to the AXIS 216FD/AXIS P3301 Installation Guide, adjust the position of the camera.
13. Slide the black protective shield on the inside of the dome cover so that the camera view is not
obstructed.
Page 7
Align slots
with screws