Aim TTi LCR400 Manuel D'instructions page 4

Display
Display Type:
Display Functions:
Inputs
Component Connection:
Maximum Voltage on
Component:
Bias Voltage:
Input Protection:
Interfaces
RS232:
General
Keyboard:
Non-Volatile Memory:
Power:
Operating Range:
Storage Range:
Environmental:
Safety & EMC:
Size:
Weight:
Options:
Dual 5-digit 0·56" LEDs with range and function indication.
Maximum display count 50,000.
Simultaneous display of R + Q, L + Q, C + D, or C + R in normal
measurement modes.
Prompts to change frequency or mode to improve accuracy.
Simultaneous display of Pass/Fail status with Bin No. in Sort mode.
4-terminal connection for both radial and axial devices.
0·3Vrms.
Switchable 2V polarising voltage for measuring electrolytic capacitors.
The instrument has been designed to withstand direct connection of
capacitors charged up to 50V DC with up to 1 Joule ( ½ CV
energy.
Serial link to PC permitting range/function control, limits setting and
results data-logging on the PC.
Full numeric keyboard for entry of limits data.
Up to 9 complete set ups stored in non-volatile memory.
220V-240V AC or 110V-120V AC ±10%, 50/60Hz, adjustable internally;
25VA max. Installation Category II.
+5ºC to 40ºC, 20-80% RH.
–40ºC to 70ºC.
Indoor use at altitudes up to 2000m, Pollution Degree 2.
Complies with EN61010-1 & EN3126-1.
For details, request the EU Declaration of Conformity for this instrument
via http://www.aimtti.com/support
365 x 240 x 95 mm, including feet.
2.9 kg.
Remote 4–terminal measurement interface.
4–terminal surface mount tweezers.
Kelvin Clip set.
PC logging software.
(serial no. needed).
2
) of stored
3