Homologations - Shure BETA91A Mode D'emploi

preamplifier when applied input signal level is equivalent to cartridge output at specified SPL
fier when applied input signal level is equivalent to cartridge output at specified SPL
[3]
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
ween 94 dB SPL and equivalent SPL of self-noise, A-weighted
SPL of self-noise, A-weighted
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
[4]
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with
slightly decreased headroom and sensitivity
phone operates at lower voltages, but with slightly decreased headroom and sensitivity
Vdc phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity
[4]
All specifications measured with a 48 Vdc phantom power supply. The microphone operates at lower voltages, but with
slightly decreased headroom and sensitivity
phone operates at lower voltages, but with slightly decreased headroom and sensitivity

Homologations

Ce produit est conforme aux exigences essentielles de toutes les directives européennes applicables et est autorisé à porter la
marque CE.
La déclaration de conformité CE peut être obtenue auprès de : www.shure.com/europe/compliance
Représentant agréé européen :
Shure Europe GmbH
[3]
S/N ratio is the difference between 94 dB SPL and equivalent SPL of self-noise, A-weighted
[4]
All specifications measured with a 48 Vdc phantom power supply. The micro­
[4]
All specifications measured with a 48 Vdc phantom power supply. The micro­
[3]
S/N ratio is the difference between 94 dB SPL and equivalent
[4]
All specifications measured with a 48
Shure Incorporated
[2]
THD of microphone preampli­
[3]
S/N ratio is the difference bet­
[3]
8/9