Maintenance; Warning - Sun-Stream SSR-808G-IHR Manuel De L'utilisateur

ALWAYS DISCONNECT HEATER FROM POWER SUPPLY BEFORE SERVICING.

WARNING

RISK OF BURNS! THIS HEATER IS HOT WHILE OPERATING. ALLOW TO COOL
WARNING
COMPLETELY BEFORE PERFORMING MAINTENANCE OR STORAGE.
When servicing or replacement of a component in the heater requires the
WARNING
removal or disconnection of a safety device, that safety device must be
re-installed properly before operating the heater.
Cleaning:
1. Clean the outer shell of the heater with a soft
damp cloth.
2. Dry the outer shell of the heater with a soft
cloth and allow to dry completely before
operating heater.
3. Do Not use abrasives, rough brushes or
scrubbing pads to clean the heater.
FIRE OR EXPLOSION MAY
WARNING
OCCUR! Do Not use alcohol,
gasoline, furniture / metal polish or any other
flammable substances to clean this heater.
Tip: Use compressed air to clean any dirt
or debris from the front guard or around
the bulb.
4. Do Not submerge the heater in water or other
liquid to clean.
© 2018, Pinnacle Climate Technologies, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE

Maintenance

Storage:
Short Term Storage
1. Disconnect heater from power supply.
NOTE: For heaters used outdoors, do not
store outdoors while not in use.
Long Term Storage
1. Disconnect heater from power supply.
2. Remove heater from wall mount.
when heater is taken out of storage.
3. Complete all cleaning procedures.
4. Wrap cord and heater in plastic shipping
bags.
5. Store in a cool, dry place.
7
Tip: Leave wall mounting bracket hanging
during off-season for easy installation
Tip: Keep original shipping materials to
store heater during off-season.
Halogen Infrared Heater User's Manual