5-1/2" (14cm)
Finished Wall
3. Position the Cabinet/Vanity
NOTE: If the cabinet/vanity is being installed below Purist bracket(s), it is critical to allow a minimum of 3 1/4"
(8.3cm) from top of cabinet or vanity to bottom edge of bracket(s) - allow 5 1/2" (14cm) from top of wall cleat to
bottom edge of bracket(s).
- Position the cabinet/vanity on the wall so the assembly cleat (pre installed on the back of cabinet) rests on the
wall cleat. Edges of cleats will be flush.
Kohler Co.
Wall Cleat
Bracket
Assembly
Cleat
5
B
1011584-2-