Whirlpool B10P Guide D'utilisation Et D'entretien page 7

Energy Saving Option
Energy saving option is designed to save energy by automatically
turning the hot water tank on and off at preset times so that hot
water is available only when desired.
Set the Energy Saving START time:
The time you want the hot water tank to turn OFF.
1. Press the ENERGY button. The energy saving icon and the
START icon will light up, and the minute display will begin to
flash.
2. Press the ADJUST up arrow and down arrow buttons, to set
the minutes when you want the hot water tank to turn on
(usually set for sometime in the early morning).
3. Press ENERGY again so that the hour display begins to flash.
4. Press the ADJUST up arrow and down arrow buttons, to set
the hour.
Set the Energy Saving STOP time:
The time you want the hot water tank to turn ON.
1. Press the ENERGY button again. The energy saving icon and
STOP icon light up and the minute display begins to flash.
2. Press the ADJUST up arrow and down arrow buttons, to set
the minutes.
3. Press ENERGY again so the hour display begins to flash.
4. Press the ADJUST up arrow and down arrow buttons, to set
the hour.
5. Press ENERGY again to exit.
Turn on energy saving mode:
Press the ENERGY SAVING button to turn on the energy saving
option. The "E" icon will light up to indicate energy saving is on.
Press the ENERGY SAVING button again to turn off the energy
saving option.
Set the Temperature Display
The temperature of the hot and cold water can be set either in
degrees Fahrenheit or degrees Celsius.
1. Press °F/°C button. The "ºF" icon will flash.
2. Press the ADJUST up arrow and down arrow buttons, to set
the temperature to "ºF" for Fahrenheit or "ºC" for Celsius.
3. Press °F/°C button again to exit.
Set the Water Temperature
1. Press the TEMPERATURE button. The hot water icon and
temperature setting on the screen will flash.
2. Press the ADJUST up arrow and down arrow buttons, to set
the hot water temperature. The hot water temperature is
adjustable from 140°F to 195.8°F (60°C to 91°C).
3. Press the TEMP button again. The cold water icon and
temperature setting will flash.
4. Press the ADJUST up arrow and down arrow buttons, to set
the cold water temperature. The cold water temperature is
adjustable from 41°F to 50°F (5°C to 10°C).
5. Press the TEMPERATURE button again to exit.
NOTE: During normal operation of the water cooler, the cold
water icon and/or the hot water icon will flash when the unit is
cooling or heating the water.
Night Light (Model D45 only)
The night light automatically lights up when the water cooler is
plugged in.
Control Panel Lock
The control panel can be locked for easy cleaning or to avoid
unintentional adjustments to the settings.
To lock the control panel, press ADJUST up arrow and down
arrow buttons, simultaneously. The control panel lock icon will
remain lit when the control panel is locked.
To unlock the control panel, press ADJUST up arrow and down
arrow buttons, simultaneously. The control panel lock icon will no
longer be visible.
Water Dispensers
Your water cooler features 2 easy-to-use water dispensers.
Hot Water Dispenser
The HOT button dispenses hot water ranging from 140ºF to
195.8°F (60°C to 91°C)*. To activate, press the hot water button.
Cold Water Dispenser
The COLD button dispenses water ranging from cold (anywhere
from 41°F to 50°F [5°C to 10°C]*) to room temperature water. To
activate, press the cold water button.
Adjustable Temperature Control (Model D45 only)
The adjustable temperature control mixes room temperature
water and cold water. Slide the control to the left for room
temperature water and to the right for water from the coldest
setting on your control panel.
*
Tested in environmental chambers at 77°F (25°C).
7