Publicité
Les langues disponibles
Les langues disponibles
Tools required: Phillips screwdriver, Power Drill, 3/8" Drill Bit and Rubber Mallet.
1. Unpack the unit and confirm that you have all the hardware and required parts.
2. With the help of an assistant, remove the mantel from the box and place it near the final installation
location.
3. Follow the instructions printed on the plastic bag containing the Tipping Restraint Hardware to
attach the tip-over restraints to the unit and the wall.
NOTE: Young children can be seriously injured by tipping furniture. You must install the Tipping
Restraint Hardware with the unit to prevent the unit from tipping, causing any accidents or damage. The
tipping restraint is intended only as a deterrent, they are not a substitute for proper adult supervision.
The tipping restraint is not an earthquake restraint. If you wish to add the extra security of earthquake
restraints, they must be purchased and installed separately.
4. Connect the fireplace to the power transformer. Follow the operating manual for the electric fireplace
insert to control your fireplace.
Assembly Instructions
4
Publicité
