Quick Start & Troubleshooting - DK2 POWER OPC503 Guide De Montage

SAFETY & OPERATION
QUICK START & TROUBLESHOOTING
QUICK START SETUP
• Add 10W30 oil to the engine
• Add Gas
• Pin both wheels into pivot brake holes.
• Turn key on
• Half throttle (choke optional for cold starts)
• Pull start the engine
CHIPPING
• Engine on highest speed
• Feed smaller trees into chute and let go, tree with auto feed.
• Feed trees up to 3 inches in diameter slowly allow cutter wheel to regain RPM between cuts.
• Feed leaves and branches up to 1 inch in diameter through the top hopper.
TROUBLESHOOTING
• ENGINE WON'T START
• Turn key on - check engine oil level - check gas level
• Unplug key switch - if engine starts, replace the key switch
• Follow your Kohler engine manual for further troubleshooting instruction
• UNIT VIBRATES
• Check your chipper for missing or loose blades
• Check your chipper wheel is not obstructed and turns freely
v.210817 | 13