Hisense RB316D4WDF Manuel De Fonctionnement De L'utilisateur page 35

11.Replace the lower hinge part to the
left side and fixing it with the special
flange self-tapping screws. Replace the
adjustable bottom feet parts
to another side and fixing it.
12.Transfer the lower door to the
property position, adjust the lower
hinge part, make the hinge axis into the
lower hole of the lower door, then tight
the bolts.
13.Upturn the middle hinge part the
direction 180 degree, transfer it and
adjust its position, make the middle
hinge axis into the upper hole of the
lower door, tight the bolts.
14. Transfer the upper door to the
appropriate position. Secure the door's
level, make the middle hinge axis into
the lower hole of the upper door.
15. Transfer the upper hinge part and
make the upper hinge axis into the
upper hole of the upper door, and
adjust the position of the upper door
(please support the upper door with
your hand when doing it), fixing the
upper hinge part with the special flange
self-tapping screws.
16. Install the screw hole cover on the
top right corner of the refrigerator.
Install the upper hinge cover (which is
in the plastic bag) on the left corner.
Put the other upper hinge cover into the
plastic bag.
middle hinge part
selftapping screws
17. Open the upper door and install the
door shelves, then close it.
Warning!
When changing the side at which the
door opens, the appliance must not be
connected to the mains. Remove plug
from the mains beforehand.
Hisense Refrigerator
12
upper hinge part