Hisense RB316D4WDF Manuel De Fonctionnement De L'utilisateur page 34

11
6. Place the upper door on a smooth
surface with its panel upwards. Loose
screw ② and part ①, then Install
them to the left side and tighten
① Stop block
② Self-tapping screw
7. Unscrew the two special flange self-
tapping screws which are used for
fixing the middle hinge part, then
remove the middle hinge part that hold
the lower door in place.
NOTE: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Don't lose it.
①
②
Hisense Refrigerator
8. Place the lower door on a smooth
surface with its panel upwards. Loose
screw ② and part ①, then Install
them to the left side and tighten
securely.
① Stop block
② Self-tapping screw
①
②
9. Change screw hole covers on middle
cover plate from left to right (as shown
in figure below).
screw hole covers
10. Lay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
remove the front feet board and the
lower hinge part by unscrewing the
special flange self-tapping screws.
screw hole covers