Matco Tools MWL64SMDC Instructions De Fonctionnement page 3

28. Do not use (or modify) the light for any other purpose
than that for which it was designed without consulting
the manufacturer's authorized representative.
29. This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.
30. Handling the brass parts of this product will expose you
to lead, a chemical known to the State of California
to cause birth defects and other reproductive harm.
Wash hands after handling.
service:
31. Light service must be performed only by the MATCO
authorized service centers listed. Service or
maintenance performed by unqualified personnel may
result in a risk of injury. Repair by unqualified personnel,
use of unauthorized parts, and failure to follow
maintenance instructions may create a risk of shock
or injury.
specific safety rules:
DO NOT let comfort or familiarity with product replace
strict adherence to cordless product safety rules. If
you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
FEATURES
• 64 Super bright SMD LED (provides 120-140 lux and 280-320 lumen)
• 18/2 SJTOW 25' UL cable remains flexible in cold weather and is water resistant
• Dual 360° swivel hooks for hanging versatility
• ABS handle with double injection, impact protection and ergonomic design provides comfort and durability
• Detachable magnetic work stand secures upright position
• UL listed adapter
OPERATING INSTRUCTIONS
• To use, plug the unit into any 100-240V AC power source, such as a wall receptacle.
• Press the switch at the back of the handle to turn unit on, press the switch again to turn it off.
WARRANTY
For a period of one (1) year from date of purchase, Matco Tools will repair or replace, at its option, without charge, any of its products,
which fails due to a defect in material or workmanship under normal usage. This limited warranty is a consumer's exclusive remedy.
Performance of any obligation under this warranty may be obtained by returning the warranted product, freight prepaid, to Matco
Tools Warranty Service Department, 4191 Murfreesboro Rd., Antioch, TN 37013.
Except where such limitations and exclusions are specifically prohibited by applicable law, (1) THE CONSUMER'S SOLE AND
EXCLUSIVE REMEDY SHALL BE THE REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCTS AS DESCRIBED ABOVE. (2) MATCO TOOLS
SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGE OR LOSS WHATSOEVER. (3) ANY IMPLIED WARRANTIES,
INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
SHALL BE LIMITED TO ONE YEAR, OTHERWISE THE REPAIR, REPLACEMENT OR REFUND AS PROVIDED UNDER THIS EXPRESS LIMITED
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. (4) ANY MODIFICATION, ALTERATION, ABUSE, UNAUTHORIZED SERVICE OR ORNAMENTAL DESIGN VOIDS THIS WARRANTY
AND IS NOT COVERED BY THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. Some
states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not
apply to you. This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.
MWL64SMDC
MWL64SMDC 64 SMD LED Corded Light
1. Hold light by insulated gripping surfaces when
performing an operation avoiding contact with hidden
wiring. Contact with a "live" wire will also make
exposed metal parts of the light "live" and shock
the operator.
2. Always be sure you have firm footing.
3. Be sure no one is below when using the light in high
locations.
4. Some material contains chemicals which may be toxic.
Take caution to prevent working dust inhalation and
skin contact. Follow material supplier safety data.
wArning: Misuse or failure to follow the safety rules
stated in this instruction manual may cause serious
personal injury.
note: The warnings and cautions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by
the operator.
3 11/13/14