Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Operating Instructions • Warning Information • Parts Break­down
WARNING
WARNING
READ,
UNDERSTAND,
OPERATING THIS DEVICE. FAILURE TO DO SO COULD CAUSE ACCIDENTS
RESULTING
IN
PERSONAL
HAZARDS SUCH AS DROPPING, TIPPING OR SLIPPING OF LOADS ARE
CAUSED PRIMARILY BY IMPROPERLY SECURING LOADS, OVERLOADING,
OFF-BALANCED OR OFF-CENTERED LOADS, USE ON OTHER THAN HARD LEVEL
SURFACES, AND USING EQUIPMENT FOR A PURPOSE FOR WHICH IT WAS NOT
DESIGNED.
• DO NOT ExCEED RATED CAPACITY.
• USE ONLY ON A HARD LEVEL CONCRETE SURFACE FREE TO ROLL WITHOUT
ANY OBSTRUCTIONS.
• REFER TO THE VEHICLE'S SERVICE MANUAL OR INQUIRE FROM THE VEHICLE
MANUFACTURER THE RECOMMENDED DOLLY SUPPORT POINTS ON THE VEHICLE
CHASSIS.
• INSPECT DOLLY AND ADAPTER FOR MECHANICAL FITNESS BEFORE USING. DO NOT
USE IF DAMAGED, ALTERED, MODIFIED, IN POOR CONDITION, OR UNSTABLE DUE
TO LOOSE OR MISSING HARDWARE. TAkE CORRECTIVE ACTION BEFORE USING.
• POSITION VEHICLE ON DOLLIES WHERE WEIGHT DISTRIBUTION IS EQUALIZED.
• MAkE SURE SETUP IS STABLE AND SECURE BEFORE MOVING A VEHICLE
SUPPORTED BY DOLLIES.
• ONLY ATTACHMENTS AND/OR ADAPTERS SUPPLIED BY SUNEx TOOLS® SHALL
BE USED.
• WEAR EYE PROTECTION THAT MEETS ANSI Z87.1 AND OSHA STANDARDS.
• STAY CLEAR OF A LIFTED LOAD.
7707 SPECIFICATIONS
Capacity: . . . . . . . . . . . . . . . . . . . . . ,500 lbs .
Base Size: . . . . . . . . . . . . . . . . . . . . 7 .5 x 28 .75"
Height: . . . . . . . . . . . . . . . . . . . . . . . 5 .3"
Shipping Weight: . . . . . . . . . . . . . . . 70 .5 lbs . (pair)
7707 & 7707ADT: Parts Breakdown & Operating Manual
7707
7707ADT
EACH SOLD
(
SEPARATELY
in PAiRS
AND
FOLLOW
ALL
INSTRUCTIONS
INJURY
AND/OR
PROPERTY
)
• Complies with ASME/PALD Standards .
BEFORE
• Adapter enables the user to remove a tire from
DAMAGE.
the vehicle and still remain mobile in the garage .
• Adapter plates remove to allow for resting the
car on its axles .
• Adapter fingers allow user to rest the vehicle
frame/uni-frame on the adapter plates safely .
• Allows user to rest vehicle under the front
A-frame with full access to steering and brake
components .
CAR DOLLY
7707ADT
CAR DOLLY

7707
1,500 Lb.
CAPACITY
1,500 Lb.
CAPACITY
ADAPTER
02/8/08

Publicité

loading

Sommaire des Matières pour Sunex Tools 7707

  • Page 1 • MAkE SURE SETUP IS STABLE AND SECURE BEFORE MOVING A VEHICLE SUPPORTED BY DOLLIES. CAPACITY • ONLY ATTACHMENTS AND/OR ADAPTERS SUPPLIED BY SUNEx TOOLS® SHALL BE USED. CAR DOLLY • WEAR EYE PROTECTION THAT MEETS ANSI Z87.1 AND OSHA STANDARDS.
  • Page 2 A list of authorized rep­air fac­ilities is available from the manufac­turer. 7707 & 7707ADT: Parts Breakdown & Operating Manual 02/8/08...
  • Page 3 This p­roduc­t c­arries a ONE-YEAR warranty. During this warranty p­eriod, Sunex Tools will rep­air or rep­lac­e at our op­tion any p­art or unit whic­h p­roves to be defec­tive in material or workmanship­.
  • Page 4 Qty. No. No. DescrIPtIoN Qty. Wheel Dolly Frame 10 Washer 8 RS7707CF Caster Frame (set of 4) 11 Hex Nut M8 RS526003 4" Casters with Brake 12 Nylon Lock Nut M8 RS526002 4" Casters without Brake 13 Spring Washer 8 Adapter Also available: Top Plate RS7707BK RS770707 Finger Plate (set of 2) RS7707ADTBK Hex Bolt M10x55 Note: Only items listed with a part number are available as Hex Bolt M8x20 replacement parts. 7707 & 7707ADT: Parts Breakdown & Operating Manual 02/8/08...
  • Page 5 Peso de embarque: ......70 .5 lbs . (par) 1,500 Lb 7707/7707ADT: Desglose de Piezas y Manual de Operación 02/8/08...
  • Page 6 Una lista de los c­entros de servic­io rec­onoc­idos está disp­onible c­on el fabric­ante. 7707/7707ADT: Desglose de Piezas y Manual de Operación 02/8/08...
  • Page 7 Nota: Algunos estados no p­ermiten la exc­lusión o limitac­ión de los daños inc­identales o c­onsec­uenc­iales, p­or lo tanto la limitac­ión o exc­lusión arriba menc­ionada quizá no p­udiera serle p­ertinente a usted. Devuelva el equip­o o c­omp­onentes a Sunex Tools, un c­entro de servic­io de garantía autorizado, c­on elflete p­agado.
  • Page 8 Poids à l’expédition : ......70,5 lb (paire) 7707/7707ADT: Vue éclatée des pièces et mode d'emploi 02/8/08...
  • Page 9 étiquettes d'avertissement soient remp­lac­és p­ar les p­ièc­es indiquées p­ar le fabric­ant.. Une liste des c­entres de servic­e rec­onnus est disp­onible aup­rès du manufac­turier. 7707/7707ADT: Vue éclatée des pièces et mode d'emploi 02/8/08...
  • Page 10 Remarque : Certaines juridic­tions ne p­ermettent p­as l'exc­lusion ou la limitation des dommages indirec­ts ou c­onséc­utifs; la limitation ou l'exc­lusion c­i-dessus p­ourrait donc­ ne p­as s'ap­p­liquer à votre c­as. Retourner l'équip­ement ou les p­ièc­es à Sunex Tools, ou à un c­entre de servic­e de garantie autorisé, p­ort p­rép­ayé.

Ce manuel est également adapté pour:

7707adt