Trailfx WR08B Manuel De L'utilisateur page 18

Gear Box Clocking Instructions for TrailFX Winches
WR08B, WR95B, WR12B, WRS95B, WRS12B
Modification of original design is not recommended and
will void warranty
Gearbox mounting screws
18
Unscrew two Tie bar bolts.
Separate the gear box from the drum.
Unscrew 10 gearbox mounting screws using
Allen key size 3.
Rotate the gearbox housing to the desired
position.
Retighten all the gearbox housing mounting
screws.
Reassemble the gearbox with the drum & tie
bar.
10 position options possible with 36°
angle increment.