Matco Tools RHES1000 Instructions De Fonctionnement page 4

RHES1000 1000 LBS. CAPACITY GEARED ENGINE STAND
WARNING
PREVENTATIVE MAINTENANCE
1. Always store the engine stand in a well protected area where it will not be exposed to inclement weather, corrosive
vapors, abrasive dust, or any other harmful elements. The stand must be cleaned of water, snow, sand, grit, oil,
grease and other foreign matter before using.
2. Lubricate the wheels, casters, zerk fittings, gear and rotating shaft with a general purpose grease.
3. Every stand owner is responsible for keeping the device labels clean and readable. Use a mild soap solution to
wash external surfaces of the device. Contact Matco for a replacement label if the device's label is not readable.
INSPECTION
Visual inspection should be made before each use of the engine stand, checking for damaged, loose or missing parts.
Each engine stand must be inspected by a manufacturer's repair facility immediately if subjected to an abnormal
load or shock. Any engine stand which appears to be damaged in any way, is found to be badly worn, or operates
abnormally MUST BE REMOVED FROM SERVICE until necessary repairs are made by a manufacturer's authorized
repair facility. It is recommended that an annual inspection of the stand be made by a manufacturer's authorized repair
facility and that any defective parts, decals or warning labels be replaced with manufacturer's specified parts. A list of
authorized repair facilities is available from the manufacturer.
WARRANTY NOTICE
Hydraulic Warranty Policy
Matco® shop equipment and tools, excluding accessories, are warranted against defects in materials or
workmanship for a period of 1 year from original purchase. We will repair or replace at our option any defective
part or unit which proves to be defective in material or workmanship within this warranty plan. This warranty
does not cover damage to equipment or tools arising from alteration, abuse or misuse, and does not cover any
repairs or replacement made by anyone other than Matco or its authorized service centers.
The foregoing obligation is Matco Tools sole liability under this or any implied warranty and under no
circumstances shall we be liable for any incidental or consequential damages.
NOTE: Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you.
Return equipment or parts to Matco Tools, or an authorized service center, transportation prepaid. Be certain to
include your name and address, evidence of the purchase date, and description of the suspected defect.
If you have any questions about warranty service, please write to Matco Tools, Stow, OH 44224. This warranty
gives you specific legal rights and you may also have other rights which vary from state to state.
RHES1000
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR
DEATH, AND/OR PROPERTY DAMAGE.
4 03/18/20