Monster MST3706XG Manuel Du Propriétaire page 3

Step 1: Attaching the Handle
Align the hole on the handle with the second hole
1.
down on the drawer assembly and (unattached) leg as
shown in figure 2. Insert M8 x 16 handle bolts through
handle, through the legs and bumpers, and into the
drawer assembly as shown in figure 2. Secure with
star bolts from handle bolt kit and hand tighten.
Attach remaining M8 x 16 bolts (on the opposite side
from push handle) directly into legs.
Step 2: Tightening Bolts (not shown)
Use a T40 driver to tighten all bolts.
2.
MST3706XG / MST3706XTG / MST3706XMB 3 rev.10/24/18