DWT CS202001 Notice Originale page 9

For indoor use only�
Battery charging time�
Movement direction�
A sign certifying that the product
complies with essential require-
ments of the EU directives and
harmonized EU standards�
Useful information�
Do not dispose of the appliance in
a domestic waste container�
Charging
• Connect the charger to the power supply�
• Insert battery into charger (see fig. 1).
• Disconnect the charger from power supply
after charging�
Charger indicators (see fig. 1)
Charger indicators 1 and 2 inform of the bat-
tery charging process� Signals of the indica-
The manufacturer reserves the possibility to introduce changes.
process
tors 1 and 2 are shown on the label 3 (see
fig. 1).
• The green indicator 1 is on, the battery is not
inserted in the charger - the charger is connected
to the power network (ready for charging)�
Fig� 1�1 - (the red indicator 2 is on, the bat-
•
tery is inserted in the charger) - the battery is be-
ing charged�
• Fig� 1�2 - (the green indicator 1 is on, the
battery is inserted in the charger) - the battery is
fully charged�
In the process of charging the
battery and the charger become hot,
it is a normal process.
• Categorically not to drop any mechanical
impact on the packaging during transport�
• When unloading / loading is not allowed to use
any kind of technology that works on the principle
of clamping packaging�
Recycle raw materials instead of
disposing as waste.
It is absolutely forbidden to throw
defective or unworkable chargers into
household garbage; they should be collected and
brought for recycling or ecologically clean utiliza-
tion�
These instructions are printed on recycled paper
manufactured without chlorine�
English
9
Transportation of the
appliances
Environmental
protection