Using Dual Transmitters - BiCom Simeon sprek Manuel De L'utilisateur

Using Dual Transmitters

There is no need to assign a transmitter user number for normal single-transmitter operation.
If you add a second transmitter to your Sprek system, it will be necessary to assign a separate
number (user '1' and user '2') to permit dual operation without interference.
Setting user number for dual-transmitter operation
Δ Important
For dual-transmitter operation, the two transmitters must be assigned
•
user number 1 and user number 2 to avoid signal interference.
To pair two transmitters with the speaker, both transmitters must be in
•
pairing mode (see below) before the speaker pairing sequence is begun.
User number display
Together
U (User)
Enter user 1 or user 2 using CH cursor
2 Sec
Press power button briefly to confirm
14
Number