Panasonic FV-36RBQL1HD Mode D'emploi Et Notice D'installation page 24

Fix the safety chains to the Range Hood using the supplied screws (V6 Ø3.9×9.5) and cut the excess chain (Fig.
Place back the metal filters and the perimeter suction panel carefully, refer to Chap. "MAINTENANCE".
Metal filter protective film must be removed.
M
V6
2 - Ø3.9×9.5
Connect the air outlet fitting of the motor unit (G) to the pipe (K) (Fig.
Connect the connectors (Fig.
Set up the electric connection to power the Range Hood only after having disconnected the main power supply switch and
complied with current regulations (Fig.
N
3
24
) and connect earth lead wire to the motor unit (G) (Fig.
2
).
4
).
1
4
G
2
1 ).
).
3
K
1