GLUCKSTEINHOME LAWRENCE Instructions D'assemblage page 3

TREE ASSEMBLY INSTRUCTIONS
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
FIG. A
Tree Stand
Assembly
Pull apart the legs of the stand so that they are
place the tree stand on a level surface.
FIG. B
Tree and Light
Assembly
Tree Top
Section 2
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from the bottom to top. Start with the bottom section and remove the protective cap before inserting the pole into
the assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow tips to fall into place or gently pull down. Follow shaping instructions below.
7. Insert the plug(s) into the extension cord(s) as per the color labels indicated (See Fig. B). Then turn to lock it in place. Plug the
adaptor, connected with the green labeled extension cord, in the wall outlet.. Your entire tree should now be lit. If some bulbs do not
light or if they flicker, search for any loose plugs and/or broken, loose, or missing bulbs. Replace bulbs promptly in order to maintain
the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from the pole and fan out one to the
right, one to the left and one at the center of the main stem. (See Fig. C)
Fig. C
Top view
9. After shaping the entire tree by following the previous steps, lightly upsweep all branch tips for a uniform look. Shift branches to fill
any gaps. Your Christmas tree is now complete and ready to be decorated.
MODEL #: TG76M4I88D00
Click
snapped into an x-shape,
Side view
To close the stand,
press the metal button and fold the
legs together.
*Electrical Rating For The Tree
Adaptor Model Number:
Control box
Adaptor
Insert GREEN Label
Model Number:
Plug into Adaptor
TS-8W29V
3
(For Indoor Use Only)
Input: 120V ,60 Hz, 0.16A
Output: 29V DC 0.28A
TS-8W29V
Insert Red Label Plugs
Into Red Labeled Extension Cord
Adaptor
To Be Plugged
Into Wall
Outlet