Télécharger Imprimer la page

easymaxx TF-8141A Mode D'emploi page 2

Publicité

Les langues disponibles

Les langues disponibles

EN
Dear Customer,
We are delighted that you have chosen this lamp. If you have
any questions, contact the customer service department via our
website:
www.service-shopping.de
Explanation of Symbols and Signals Words
Danger symbol: This symbol indicates risks of injury. Read
through the associated safety instructions carefully and
follow them.
Protection class III
Circuit symbol for direct current
Supplementary information
Read instructions before use!
warns of possible serious injuries and danger to
WARNING
life
CAUTION
warns of slight to moderate injuries
NOTICE
warns of damage to property
Intended Use
The article is suitable for use as a battery-powered lamp. It is
not a toy!
The article is designed for personal and domestic use only and
is not intended for commercial applications. The article should
only be used as described in these instructions. Any other use
is deemed to be improper.
The following are excluded from the warranty: all defects caused
by improper handling, damage or unauthorised attempts at re-
pair. This also applies to normal wear and tear.
SAFETY INSTRUCTIONS
WARNING – Danger of suffocation! Keep the packaging
material away from children and animals.
WARNING – Danger of acid burns from battery acid!
Batteries can be deadly if swallowed. Keep batteries and the
article out of the reach of children and animals. If a battery is
swallowed, seek medical assistance immediately.
CAUTION – Danger of acid burns from battery acid! If a
battery has leaked, do not allow your skin, eyes and mucous
membranes to come into contact with the battery acid. If you
touch battery acid, rinse the affected area with abundant fresh
water immediately and contact a doctor as soon as possible.
CAUTION – Risk of dazzling! Never look directly into the light
beam! Never aim the light beam directly at other people or
animals.
Ensure that the article cannot come into contact with
water!
NOTICE – Risk of Damage to Material and Property
Before inserting the batteries, check whether the contacts in
the article and on the batteries are clean, and clean them if
necessary.
Use only the battery type specifi ed in the "Technical Data".
Always replace all batteries together. Do not use batteries of
different types or brands, or batteries with different capacities.
When replacing batteries, ensure the correct polarity (+ / –).
Take the batteries out of the article when they are dead or if the
article is not going to be used for a prolonged period. This will
prevent any damage if a battery leaks.
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
Article number: 04797
The batteries must not be recharged or reactivated by other
means, dismantled, thrown into a fi re, immersed in fl uids, or
short-circuited.
Protect the article from: impacts, heat, direct sunlight, sub-zero
temperatures, moisture and wet conditions.
Store the article in a dry place and at room temperatures.
Dust off the article with a soft, dry cloth to clean it. More intense
soiling can be wiped off with a damp cloth.
Do not use the article if it shows obvious signs of damage. Do
not take the article apart and do not attempt to repair it. In the
event of any damage, please contact our customer service de-
partment.
Items Supplied
1 x LED lamp with two head lights
1 x instructions
You also require 6 batteries (1.5 V, type AAA; 3 batteries each head
light). These are not supplied with the article.
Inserting / Changing Batteries
1. The battery compartments are located on the back of the head
lights. To open it, slide the battery compartment cover counter
to the direction of the arrow and remove it.
2. If applicable, remove the empty batteries and insert 3 new
batteries (1.5 V, type AAA) into the battery compartment.
Ensure the correct polarity (+ / –).
3. Insert the battery compartment cover and slide it back onto the
battery compartment in the direction of the arrow.
If the performance of the article diminishes, the batteries should
be replaced.
Use
1. Position the article – The article can be hung up or positioned
using the fl exible joint.
2. Switch on / off – The following settings are possible:
Press 1 x: 100 % brightness
Press 2 x: 50 % brightness
Press 3 x: Flash
Press 4 x: switch off article
Technical Data
Article number:
Model number:
Voltage:
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the article in an environmentally friendly manner
at a recycling centre for used electrical and electronic
devices. More information is available from your local
authorities.
Batteries should be removed before the article is disposed
of and should be disposed of separately from the article. To
protect the environment, batteries must not be disposed of
with normal household waste, but must be taken to suitable
collection points. Also note the relevant statutory regula-
tions governing the disposal of batteries.
Customer Service / Importer:
All rights reserved.
The light heads can be rotated 360° and due to the
fl exible joint individually adjusted.
The light heads can be switched on and off individually.
The lamp has three light modes.
04797
TF-8141A
4.5 V DC each (3 x 1.5 V battery, type AAA)
+49 38851 314650 *)
Instructions
Z 04797 M DS V1 0418

Publicité

loading

Ce manuel est également adapté pour:

04797