GLUCKSTEINHOME JERSEY Instructions D'assemblage page 3

TREE ASSEMBLY INSTRUCTIONS
Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
FIG. A
Tree Stand
Assembly
FIG. B
Tree and Light
Assembly
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to top. Start with the bottom section and remove the protective cap before inserting it into the
assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all branch hinges are free of wires.
7. Insert the plugs into the extension cord as per colour labels indicated.(see Fig. B ), Then turn to lock in place. Plug the Adaptor,
connected with the Green labeled extension cord, into the wall outlet. Your entire tree should now be lit. If some bulbs do not light or
flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or replacing the bad bulbs promptly
helps to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the centre of the main stem. (See Fig. C)
Fig. C
Top view
9. After shaping the entire tree by following the previous steps, lightly upsweep all branch tips for a uniform look. Shift branches to fill
any gaps. Your Christmas tree is now complete and ready to be decorated.
MODEL #: TG70M3BACL00
Pull apart the legs of the stand so that they are
snapped into an x-shape,
place the tree stand on a level surface.
Tree Top
Section 2
Click
press the metal button and fold the
Insert GREEN Label
Plug into Adaptor
Side view
3
To close the stand,
legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.16A
Output: 28V DC 0.28A
Adaptor Model Number: TS-8W28V
Insert Red Label Plugs
Into Red Labeled Extension Cord
Adaptor To Be Plugged
Model Number:
TS-8W28V
Adaptor
Into Wall
Outlet