GLUCKSTEINHOME 91540557 Instructions D'assemblage page 3

TREE ASSEMBLY INSTRUCTIONS
This tree comes with Quick-Set® technology-Set up and light up your tree in less than 10 minutes! Carefully follow
the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface. (See Fig. A)
FIG. A
Tree Stand
Assembly
Pull apart the legs of the stand so that they are
place the tree stand on a level surface.
FIG. B
Tree and Light
Assembly
Tree Top
Section 2
Section 1
3. Each tree section is numbered with a tag. Please identify all sections before assembling.
4. Assemble the tree from bottom to top. Start with the bottom section and remove the protective cap before inserting it into the
assembled stand. Make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) to the lower section(s) until inserting the tree top.
6. Allow branches to fall into place or gently pull up and out. When adjusting branches, be sure that all branch hinges are free of
wires.
7. Insert green labelled plug into the wall outlet.(see Fig. B ), your entire tree should now be lit. If some bulbs do not light or
flicker, search for any loose plugs and/or broken, loose or missing bulbs. Connecting the plugs or replacing the bad bulbs
promptly helps to maintain the performance and life expectancy of your pre-lit tree.
8. Begin to shape the branches and tips working from the bottom to the top. Start with tips farthest from
the pole and fan out one to the right, one to the left and one at the centre of the main stem. (See Fig. C)
Fig. C
Top view
9. After shaping the entire tree by following the previous steps, lightly upsweep all branch tips for a uniform look. Shift branches
to fill any gaps. Your Christmas tree is now complete and ready to be decorated.
MODEL #: TG70M3ANRL03
Click
snapped into an x-shape,
Insert GREEN Label
Plug into Adaptor
Side view
3
To close the stand,
press the metal button and fold the
legs together.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input: 120V, 60Hz, 0.16A
Output: 28V DC 0.28A
Adaptor Model Number:
Do Not Tamper with
Internal Parts
Open the
protective
cover
Do Not Tamper with
Internal Parts
Open the
protective
cover
Adaptor
Model Number:
TS-8W28V
TS-8W28V
Adaptor
To Be Plugged
Into Wall
Outlet