Table des Matières
Publicité
EN
Translation of the original instructions
Our products comply with the directives that refer to EC marking.
The class II or Double Insulation symbol indicates that this product is designed so as not to
require an earth connection. These products are designed so that a single fault cannot cause
the user to come in contact with a hazardous voltage, thanks to the casing being made of
insulating material.
This symbol indicates that the product meets the requirements of the new directives
introduced so as to protect the environment and must be disposed of appropriately at the
end of its life cycle. Request information from the local Authorities about the areas dedicated
to waste disposal.
This symbol, generally together with the description, informs the user that there are important
operations and instructions to be read.
ATTENTION! HOT SURFACES.
RISK OF BURNS
DO NOT USE THIS APPLIANCE WHILE CLOSE TO BATHTUBS, SINKS OR OTHER CONTAINERS
THAT HOLD WATER.
GENERAL SAFETY WARNINGS
To avoid damage and dangers due to improper use, carefully follow the instructions
for use and keep them in a safe place. If the product is handed over to a third party
also provide the instruction booklet.
UNPACKING AND INSPECTING THE PRODUCT
Remove the product from its packaging and make sure it is intact and has no visible signs of damage
caused during transport.
In case of doubt, do not use the appliance and contact the nearest Technical Assistance Centre (see
"Technical assistance centres (IT)" specified in this manual).
ATTENTION! DANGER FOR CHILDREN.
The packaging materials (bags made of plastic, polystyrene foam, etc.) must not be
left within reach of children as they are potential sources of danger.
EN - USE MANUAL AND WARRANTY
Professional appliance
EXPLANATION OF SYMBOLS
9
Publicité
Table des Matières
