RISCO Group VUpoint RVCM52W Guide D'installation page 17

2. Click Add Trigger; the Add Triggers dialog box appears.
Figure 14 Add Trigger
3. Define the following fields in the Add Trigger dialog box:
Field Description
Label Enter a name for the camera trigger
Camera Choose a camera from the list
Event Type Choose an event type from the list
Event Choose the event from the list, e.g.
alarm, duress, etc.
Additional fields are displayed in the Add Trigger dialog box according to the
event type that you selected (see examples below for Partition and Detector event
types).
Figure 15 Add Partition Event Trigger
Event Type
Partition and Detector events
Partition and Detector events
Partition and Detector events
Partition and Detector events
Figure 16 Add Detector Event Trigger
15