Publicité
Les langues disponibles
Les langues disponibles
REQUIREMENTS
1. Only non-combustible materials should come in direct contact with any part of the Fire Pit. Underneath area should
be non-combustible as well.
2.
be used to ensure a proper installation.
3.
4. Y
5. Follow the local code requirements for the gas type being used. This Fire Pit should be installed in accordance with
local codes and ordinances or in the absence of local codes, with the latest National Fuel Gas Code, ANSI Z223.1
NFPA54 or CSA B149.1, Natural and Propane Installation Code in Canada.
6. Fire Pits create high temperatures, it is very important to have any combustibles at a safe distance.
7. Fire pit should never be left unattended while in operation. It should always be a safe distance from all trees and
combustible landscape materials.
8.
9. CAUTION: A minimum of 18 square inches of cross ventilation (2 sides) is required to keep the components
in good working order.
10. The insulation square pad provided with the Fire Pit is to be placed foil up toward the bottom of pan on top of the
11.
ventilation.
12. These products are designed for outdoor use only. Not approved for any indoor use.
13. This Fire Pit is designed to have
must be a minimum of 1/4-inch diameter or larger.
14.
15. Do not use material that will absorb moisture over time and will not release this moisture quickly. Moisture can boil in
this material and can rapidly break apart and cause damage or personal injury.
16.
and damage to the component that will not be covered under our warranty.
17. Cover the complete burner with
above the burner.
Contact us for assistance: customercare@jrhome.com | (800) 561-5550
covering the burner. When purchasing decorative rock it is recommended
(min. 1-inch d
). Completely cover the burner, no more than 1 inch
NOTE: If using all glass media, glass
9
Publicité
