Publicité
Les langues disponibles
Les langues disponibles
Operation
Paper / Credit Card / CD Entry:
Auto Reverse Technology
When the shredder detects over-capacity shredding, the motor will immediately stop and reject
paper before actual shredding begins.
Make sure you do not exceed sheet
count per pass (15 sheets max).
Insert paper as straight as possible
into feed slot and release.
NOTE:
• Always turn off and unplug the shredder when not in use.
• This shredder will shred staples and small paper clips. It is recommended that you remove paper
clips whenever possible to extend the lifespan of your shredder.
• Only shred credit cards by feeding them vertically i nto the middle of the entry, releasing when
shredding begins. Never feed more than one credit card at a time.
• Overfeeding the shredder: Shredding beyond the specified sheet capacity can result in extensive
damage to the shredder. Overfeeding will strain the machine and quickly wear and break the cut-
ting blades and internal components.
• Overheating with extended use: In the event that the shredder has shred continuously beyond
the maximum running time and overheating, the unit will automatically shut off. If this happens,
switch the shredder off for 45 minutes or longer before resuming normal operation.
Features a CD/DVD destroyer:
CONTINUED NEXT PAGE
8
ENGLISH
!
Caution:
Do not hold CD/DVD with finger through the
center ring while feeding into the shredder. Serious injury
may occur.
Never feed more than one credit card or CD/DVD at a time.
1) Hold the CD/DVD by the edge and feed one at a time, releasing
when shredding begins.
2) Shredder will stop when the entire disc has been destroyed.
Insert one credit card at a time into
the middle of the feed slot.
Publicité
