Publicité
Les langues disponibles
Les langues disponibles
Operation
Control Switch
Using the switch located on the unit, select one of the following
settings by sliding the switch either left or right. (FIGURE 2)
Auto / On: This setting allows the shredder to be automatically started by inserting
paper into the feed slot. Always feed the paper in as straight as possible. When the
paper has passed through, the shredder will automatically stop.
Off: This setting turns off all features of the shredder. For safety reasons, we recommend
that you leave the shredder in the "
or not in use.
Reverse: In the unlikely event of a paper jam, the reverse setting can be used to help
clear the cutters of paper that did not pass through. Never attempt to clear a jam by
using the reverse function until you have emptied the wastebasket.
Forward: The forward setting can also be used to help clear the cutters in the event
of a paper jam. This allows to manually activate the shredder into cutting mode.
" position whenever the shredder is unattended
FIGURE 2
CONTINUED NEXT PAGE
ENGLISH
7
Publicité
