Publicité
Les langues disponibles
Les langues disponibles
OPERATION
Switch on
Use the ON/OFF rocker switch to turn on the appliance.
MAINTENANCE AND CLEANING
Attention! Careful and regular maintenance and cleaning of infrared Heater is
required to attain a long and effi cient operation of your appliance.
Cleaning
•
Turn off the circuit breaker before maintenance and let the unit cool
completely.
•
To keep the heater clean, the outer shell may be cleaned with a soft, damp
cloth. You may use a mild detergent if necessary. After cleaning, dry the
unit with a soft cloth.
•
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough
brushes to clean the heater. This may cause damage or deterioration to the
surface of the heater.
•
Although this heater is outdoor approved(Balconies and patios), DO
NOT immerse the heater in water for your safety. Wait until the unit is
completely dry before use.
Storage
If the heater will not be used for a long period of time, store it in a cool, dry
location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.
Troubleshooting
If the heater will not operate, please check the following before seeking repair
of service:
•
Check if electricity to the main fuse is working.
•
Make certain the power switches are turned on. If not, choose a setting .
EN
13
Publicité
