e-TWOW BOOSTER-V Manuel Utilisateur page 8

Menu for speed limit
To set up a speed limit, please follow the
steps detailed below:
• Turn off the scooter
• Press and hold the electromag-
netic brake lever with your left thumb.
Keep it pressed during the entire op-
eration
• Turn on the scooter. The dis-
play will show the L1 option.
• To set the desired speed lim-
it, press the light button successively to
navigate the L1-L2 -L3 -L4 -L5 options
• To set your desired option,
press the (S) button
• To end this operation, release
the electromagnetic brake and turn on
the scooter.
Setting the scooter's functions
The scooter features 3 functions:
The Zero Start - P1 function - The purpose of this
function is to make the scooter safer to use. Once you
activate it, this function will only allow the scooter to be
accelerated after it has been previously pushed with
the foot and the wheel has been set into motion.
This will prevent the user from accidental acceleration.
The Zero Start function is not automatically set; it needs to be activated manually
from the central control unit.
The Cruise control - P2 function—This function allows the user to set and maintain a
constant speed for the scooter, without having to constantly press on the acceleration
lever. To activate the Cruise Control Function you must press the acceleration lever
and maintain a constant speed for 5 seconds. Then you can release the acceleration
lever and the scooter will continue to move at the set speed. You can easily deac-
tivate this function by pressing the acceleration lever or the electromagnetic brake
lever. The cruise control function is not automatically set. It needs to be set manually
from the central control unit. The P2 function is not available for the GT scooter.
The Sport - P3 function- (this function is only available on certain models) The sport
function eliminates the factory speed limitation, offering a higher speed and a higher
engine torque. The Sport function is not automatically set. It needs to be set manually
from the central control unit. The P3 function is not available for the GT scooter.
L1 = Limit the speed at 6 km/h
L2 = Limit the speed at 12 km/h
L3 = Limit the speed at 20 km/h
L4 = Limit the speed at 25 km/h
L5 = Limit the speed at 30 km/h
*only if the legislation allows it, or on pro-
fessional tracks
14
WARNING!
To avoid dangerous situations, we recommend that you only use this function for
climbing ramps, or that you only use it on specially arranged tracks.
Setting the functions
To choose one of the 3 functions (P1, P2, P3), follow these instructions:
• Turn on the scooter
• Press the electromagnetic brake lever all the way and keep it pressed
during the entire operation.
• Press the power button. The display will show the P1 symbol. Press the On/
Off light button to navigate the 3 functions P1—P2—P3.
• Each function has two options: On and Off. To navigate between On and
Off, press the Setting (S) button.
• To save your settings, release the electromagnetic brake lever.
15