HoMedics TOTALCLEAN AP-T10 Manuel D'instructions page 6

HOW TO USE
BEFORE TURNING THE UNIT ON
• Take the air purifier out of the box and remove the clear protective plastic bag.
• Place the air purifier on a firm, level surface.
• Plug the power cord into a household electrical outlet.
POWER BUTTON AND FAN SPEED SETTINGS
• To turn the air purifier on, press the power
• This air purifier has 2 fan speed settings: low (1) and high (2). The higher the fan speed setting, the faster
the air will be purified. To select or change fan speed, press the fan speed
setting is reached.
IONIZER SETTING WITH ON/OFF
Ion particles have a negative charge that attaches to airborne particles, making them easier to be captured by
the filtration system. Press the ionizer
ionizer is in use. Press the ionizer
NOTE: Dust particles may accumulate on surfaces around the air purifier when the ionizer is in use. These
dust particles can be vacuumed or wiped away with a soft, damp cloth.
NOTE: You may hear occasional popping sounds when the ionizer is used. This is normal.
NOTE: The ionizer produces less ozone than the UL-established limits of 0.05 ppm. Ozone may be harmful
around birds and small pets. To prevent ozone buildup, use the ionizer feature in a well-ventilated area.
NIGHT-LIGHT
The nightlight has 3 options. Press the night-light button once to turn the blue night-light on. Press again to
turn the blue night-light and display lights off. Press a third time to turn the display lights on.
OIL TRAY
Use essential oil (not included) to deliver scent into the air.
NOTE: For use with the included HoMedics essential oil pads only. Do not add essential oils anywhere else in
the unit as it may cause damage.
NOTE: Do not leave a filled essential oil pad in the oil tray if it will be out of use for a long period of time.
button.
button to turn the ionizer on. The blue light will glow to indicate the
button again to turn the ionizer off.
6
button until the desired