Commissioning And Temperature Settings - Transtherm Elégance Loft Mode D'emploi

Notice Elégance 5L.qxd
P 8
11/07/07 11:17 Page 24
Commissioning and Temperatures settings
1 • Commissioning
- Once you have waited 48 hours, connect your cabinet to the
mains, having checked that there is power to the socket (check fuses and
their amperage, the state of the trip, and if necessary try out another
electrical appliance to verify the supply).
- Once connected to the mains, make sure that the Off/On switch, on
the right of your cabinet's control panel, is set at "On" (I).
2 • Temperature settings
The temperature control(s) and setting(s) are adjusted from your wine
cabinet's settings panel, as shown below:
Temperature display
Temperature
display
• Temperature display: Displays the current temperature inside your
wine cabinet.
• Adjustment button ( SET 1/ SET 2/probe): sets the desired tempe-
rature inside the cabinet.
• On/off button: switches the wine cabinet on and off.
Adjustment buttons
Confirmation button
Adjustement buttons
Confirmation button
On/Off button