Intended Use; Identification Plate; Operating Elements; Using For The First Time - Wolf Garten LYCOS 40/740 B Mode D'emploi

EN

Intended use

The leaf blower is intended solely for the blowing
together of leaves and mowed cuttings in private
households.
Any other use is classed as an unintended use.
The user is liable for any damage arising from unin-
tended use.
Incorrect/abnormal use
This leaf blower should not be used in public facili-
ties, parks, sports grounds, roads etc. nor in agricul-
ture or forestry.

Identification plate

Position
The identification plate is located on the leaf blower
casing.
Note
The label has the status of a certificate. It
must never be altered or obliterated.
Structure
1 Guaranteed sound level
2 CE label
3 Manufacturer
4 Device group
5 Model name
6 Model number
7 Serial number
8 Power
9 Engine speed in rpm
10 Weight
11 Rated voltage, current type
12 Protection class /IP rating
13 Disposal instruction
14 Year of manufacture
18

Operating elements

Operating elements I
1 Hook for carrying belt
2 Handle
3 Adjustment wheel for blowing speed
4 Turbo button
5 Blowing tube locating button
6 Blowing tube
7 Attachment for short blowing tube
8 Attachment for long blowing tube
9 Power pack release
10 Power pack compartment
11 Leaf blower casing
12 On/off switch
13 Carrying belt
14 Rake
Information
Operating elements marked with
optionally available as accessories and
are not contained in the scope of the
delivery.

Using for the first time

Supplementary documentation
Make sure the supplied instruction man-
uals of the charger and the power pack
are available. Please read and under-
stand them before using the device.
Power pack charging
Risk of injuries or material damage
¾ Charge the power pack using the char-
ger approved by the manufacturer. The
designations of the approved chargers
are listed in the enclosed CE Declaration
of Conformity.
Attention!
The power pack is supplied partially charged. Be-
fore first use, fully charge the power pack to ensure
full capacity of the power pack.
Power pack charging must be carried out ac-
Î
cording to the instructions in the supplementary
documentation.
Operating times
Observe the times stipulated in local byelaws.
Î
Check with your local authorities to determine if
Î
there are any operating time limitations.
Intended use
WARNING!
are